EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Ultra Lightweight Mirror and Opto-Mechanical–Thermal Coupling Analysis Based on Solar Thermal Radiation

Quanliang Dong, Jinhe Yang iD, Tong Zhang, Xiaoming Wang

Sensors · 16.01.2025 · 25 (2) · 483

DOI: 10.3390/s25020483 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 16.01.2025. Verfasst von Quanliang Dong und 3 weiteren Autor:innen. Beteiligte Einrichtung: Changchun Institute of Optics, Fine Mechanics and Physics (CIOMP), Chinese Academy of Sciences, Changchun 130033, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: THE NATIONAL NATURAL SCIENCE FOUNDATION OF CHINA, THE GENERAL PROGRAM OF NATIONAL NATURAL SCIENCE FOUNDATION OF CHINA.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To improve maneuverability, the focus of photoelectric theodolites is on reducing the weight of the primary mirror and enhancing its optical performance. This study uses MOAT and Sobol methods to identify key parameters that affect design. Using the high-sensitivity part as the optimization domain, six optimization results were obtained based on the multi-objective SIMP topology optimization method and synthesized into a compromise optimization structure. The performance of the mirror before and after optimization was compared on the opto-mechanical–thermal level. Modal analysis shows the optimized structure has a first natural frequency of 716.84 Hz, indicating excellent stiffness and avoiding low-frequency resonance, with a 30.37% weight reduction. Optical performance is also improved, with a 6 μm reduction in the spot diagram radius and an 8.95 nm decrease in RMS. Simulations under real-world conditions show that the lightweight mirror performs better in resisting gravity deformation and maintaining imaging quality. At maximum thermal deformation, the spot diagram radius of the optimized mirror is 1521.819 μm, with only a 0.145% difference in imaging quality compared to the original. In conclusion, the optimized structure shows comprehensive advantages. Constructing the optical system components and the real physical environment of the site provides a valuable reference for the optimization and analysis of the mirror.

Schlagwörter

Stichwörter der Autor:innen

mirroropto-mechanical–thermal couplingray tracingstructure optimization

Autor:innen und Institutionen

  • Changchun Institute of Optics, Fine Mechanics and Physics (CIOMP), Chinese Academy of Sciences, Changchun 130033, China.
  • University of Chinese Academy of Sciences, Beijing 100049, China.

ORCID-Profile: Jinhe Yang

Förderung

  • THE NATIONAL NATURAL SCIENCE FOUNDATION OF CHINA
  • THE GENERAL PROGRAM OF NATIONAL NATURAL SCIENCE FOUNDATION OF CHINA

Zitieren

APA

Dong, Q., Yang, J., Zhang, T., & Wang, X. (2025). Optimization of Ultra Lightweight Mirror and Opto-Mechanical–Thermal Coupling Analysis Based on Solar Thermal Radiation. Sensors, 25(2), 483. https://doi.org/10.3390/s25020483

Vancouver

Dong Q, Yang J, Zhang T, Wang X. Optimization of Ultra Lightweight Mirror and Opto-Mechanical–Thermal Coupling Analysis Based on Solar Thermal Radiation. Sensors. 2025;25(2):483. doi:10.3390/s25020483

BibTeX
@article{Dong2025,
  author = {Dong, Quanliang and Yang, Jinhe and Zhang, Tong and Wang, Xiaoming},
  title = {Optimization of Ultra Lightweight Mirror and Opto-Mechanical–Thermal Coupling Analysis Based on Solar Thermal Radiation},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {2},
  pages = {483},
  doi = {10.3390/s25020483}
}
Kostenlos starten →