EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Impact Polystyrene Structured Light Components for Terahertz Imaging Applications

Kasparas Stanaitis iD, Vladislovas Čižas iD, Augustė Bielevičiūtė iD, Ignas Grigelionis iD, Linas Minkevičius iD

Sensors · 28.12.2024 · 25 (1) · 131

DOI: 10.3390/s25010131 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 28.12.2024. Verfasst von Kasparas Stanaitis und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Optoelectronics, Center for Physical Sciences and Technology (FTMC), Saulėtekio Ave. 3, LT-10257 Vilnius, Lithuania. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Council of Lithuania (LMTLT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Terahertz frequency range imaging has become more and more attractive for a wide range of practical applications; however, further component optimization is still required. The presented research introduces 3D-printed high-impact polystyrene (HIPS) beam-shaping components for the terahertz range. Gaussian, Bessel, and Airy beam-shaping structures are fabricated, and different combinations are employed to evaluate imaging system performance. The combination of the Gaussian element as focusing and the Bessel element as collecting is revealed to be similarly efficient and less sensitive to misalignment than the classical Gaussian–Gaussian element setup. The presented research paves the way for introducing cost-effective structured light beam-shaping elements into THz imaging systems.

Schlagwörter

Stichwörter der Autor:innen

3D printingHIPSTHz imagingterahertzterahertz beam forming

Autor:innen und Institutionen

  • Department of Optoelectronics, Center for Physical Sciences and Technology (FTMC), Saulėtekio Ave. 3, LT-10257 Vilnius, Lithuania.
  • Institute of Photonics and Nanotechnology, Vilnius University, Saulėtekio Ave. 3, LT-10257 Vilnius, Lithuania.

ORCID-Profile: Kasparas Stanaitis, Vladislovas Čižas, Augustė Bielevičiūtė, Ignas Grigelionis, Linas Minkevičius

Förderung

  • Research Council of Lithuania (LMTLT)

Zitieren

APA

Stanaitis, K., Čižas, V., Bielevičiūtė, A., Grigelionis, I., & Minkevičius, L. (2024). High-Impact Polystyrene Structured Light Components for Terahertz Imaging Applications. Sensors, 25(1), 131. https://doi.org/10.3390/s25010131

Vancouver

Stanaitis K, Čižas V, Bielevičiūtė A, Grigelionis I, Minkevičius L. High-Impact Polystyrene Structured Light Components for Terahertz Imaging Applications. Sensors. 2024;25(1):131. doi:10.3390/s25010131

BibTeX
@article{Stanaitis2024,
  author = {Stanaitis, Kasparas and Čižas, Vladislovas and Bielevičiūtė, Augustė and Grigelionis, Ignas and Minkevičius, Linas},
  title = {High-Impact Polystyrene Structured Light Components for Terahertz Imaging Applications},
  journal = {Sensors},
  year = {2024},
  volume = {25},
  number = {1},
  pages = {131},
  doi = {10.3390/s25010131}
}
Kostenlos starten →