EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Additive Manufacturing of a Frost-Detection Resistive Sensor for Optimizing Demand Defrost in Refrigeration Systems

Martim Lima de Aguiar iD, Pedro Dinis Gaspar iD, Pedro Dinho da Silva iD

Sensors · 22.12.2024 · 24 (24) · 8193

DOI: 10.3390/s24248193 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 22.12.2024. Verfasst von Martim Lima de Aguiar und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electromechanical Engineering, University of Beira Interior, Rua Marquês d'Ávila e Bolama, 6201-001 Covilhã, Portugal. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia (FCT) and C-MAST (Centre for Mechanical and Aerospace Science and Technologies), undação para a Ciência e Tecnologia (FCT) C-MAST (Centre for Mechanical and Aerospace Science and Technologies).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents the development of a resistive frost-detection sensor fabricated using Fused Filament Fabrication (FFF) with a conductive filament. This sensor was designed to enhance demand-defrost control in industrial refrigeration systems. Frost accumulation on evaporator surfaces blocks airflow and creates a thermal insulating barrier that reduces heat exchange efficiency, increasing energy consumption and operational costs. Traditional timed defrosting control methods can mitigate these effects but often lead to inefficiencies due to their inability to align with actual frost accumulation, which can vary according to system and environmental conditions. Frost-detection sensors aim to solve this problem by acting as a tool to support defrosting control. A series of tests were conducted to evaluate the sensor’s performance in detecting frost under controlled conditions on a heat exchanger (HX). The sensor reliably detected frost in all cases, demonstrating its effectiveness in real-time frost detection. The sensor measurements were validated by comparison with results obtained through a computer vision method, confirming its reliability. It was also found that the sensor can detect temperature changes. This advancement in sensor technology highlights the potential of additive manufacturing to provide cost-effective, customizable, replicable, and compact sensor designs, contributing to improved system performance and energy efficiency in refrigeration systems.

Schlagwörter

Stichwörter der Autor:innen

3D printingadditive manufacturingconductive filamentdemand defrostingfrost detectionfused filament fabricationheat exchangerrefrigeration systemsresistive sensortemperature sensor

Autor:innen und Institutionen

  • Department of Electromechanical Engineering, University of Beira Interior, Rua Marquês d'Ávila e Bolama, 6201-001 Covilhã, Portugal.
  • C-MAST-Center for Mechanical and Aerospace Science and Technologies, 6201-001 Covilhã, Portugal.

ORCID-Profile: Martim Lima de Aguiar, Pedro Dinis Gaspar, Pedro Dinho da Silva

Förderung

  • Fundação para a Ciência e Tecnologia (FCT) and C-MAST (Centre for Mechanical and Aerospace Science and Technologies)
  • undação para a Ciência e Tecnologia (FCT) C-MAST (Centre for Mechanical and Aerospace Science and Technologies)

Zitieren

APA

Aguiar, M. L., Gaspar, P. D., & Silva, P. D. D. (2024). Additive Manufacturing of a Frost-Detection Resistive Sensor for Optimizing Demand Defrost in Refrigeration Systems. Sensors, 24(24), 8193. https://doi.org/10.3390/s24248193

Vancouver

Aguiar ML, Gaspar PD, Silva PDD. Additive Manufacturing of a Frost-Detection Resistive Sensor for Optimizing Demand Defrost in Refrigeration Systems. Sensors. 2024;24(24):8193. doi:10.3390/s24248193

BibTeX
@article{Aguiar2024,
  author = {Aguiar, Martim Lima de and Gaspar, Pedro Dinis and Silva, Pedro Dinho da},
  title = {Additive Manufacturing of a Frost-Detection Resistive Sensor for Optimizing Demand Defrost in Refrigeration Systems},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {24},
  pages = {8193},
  doi = {10.3390/s24248193}
}
Kostenlos starten →