EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Implementation and Experimental Application of Industrial IoT Architecture Using Automation and IoT Hardware/Software

David Calderón, Francisco Javier Folgado iD, Isaías González iD, Antonio José Calderón iD

Sensors · 18.12.2024 · 24 (24) · 8074

DOI: 10.3390/s24248074 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 18.12.2024. Verfasst von David Calderón und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical Engineering, Electronics and Automation, University of Extremadura, Avenida de Elvas, s/n, 06006 Badajoz, Spain. Die Arbeit wurde bisher 62-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Junta de Extremadura, European Regional Development Funds FEDER.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paradigms of Industry 4.0 and Industrial Internet of Things (IIoT) require functional architectures to deploy and organize hardware and software taking advantage of modern digital technologies in industrial systems. In this sense, a lot of the literature proposes and describes this type of architecture with a conceptual angle, without providing experimental validation or with scarce details about the involved equipment under real operation. Aiming at overcoming these limitations, this paper presents the experimental application of an IIoT architecture divided into four functional layers, namely, Sensing, Network, Middleware and Application layers. Automation and IoT hardware and software are used to implement and apply the architecture. Special attention is put on the software Grafana, chosen in the top layer to deploy graphical user interfaces that are remotely accessible via web. A pilot microgrid integrating photovoltaic energy and hydrogen served as scenario to test and prove the suitability of the architecture in four application cases.

Schlagwörter

Stichwörter der Autor:innen

GrafanaIIoTIndustry 4.0functional architecturemicrogridmonitoringopen-source

Autor:innen und Institutionen

  • Department of Electrical Engineering, Electronics and Automation, University of Extremadura, Avenida de Elvas, s/n, 06006 Badajoz, Spain.

ORCID-Profile: Francisco Javier Folgado, Isaías González, Antonio José Calderón

Förderung

  • Junta de Extremadura
  • European Regional Development Funds FEDER

Zitieren

APA

Calderón, D., Folgado, F. J., González, I., & Calderón, A. J. (2024). Implementation and Experimental Application of Industrial IoT Architecture Using Automation and IoT Hardware/Software. Sensors, 24(24), 8074. https://doi.org/10.3390/s24248074

Vancouver

Calderón D, Folgado FJ, González I, Calderón AJ. Implementation and Experimental Application of Industrial IoT Architecture Using Automation and IoT Hardware/Software. Sensors. 2024;24(24):8074. doi:10.3390/s24248074

BibTeX
@article{Caldern2024,
  author = {Calderón, David and Folgado, Francisco Javier and González, Isaías and Calderón, Antonio José},
  title = {Implementation and Experimental Application of Industrial IoT Architecture Using Automation and IoT Hardware/Software},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {24},
  pages = {8074},
  doi = {10.3390/s24248074}
}
Kostenlos starten →