EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Modeling Carbon-Based Nanomaterials (CNMs) and Derived Composites and Devices

Agustίn Chiminelli iD, Ivan Radović iD, Matteo Fasano iD, Alessandro Fantoni iD, Manuel Laspalas iD, Ana Kalinić iD, Marina Provenzano iD, Miguel Fernandes iD

Sensors · 30.11.2024 · 24 (23) · 7665

DOI: 10.3390/s24237665 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Sensors, online erschienen am 30.11.2024. Verfasst von Agustίn Chiminelli und 7 weiteren Autor:innen. Beteiligte Einrichtung: Materials and Components Division, Technological Institute of Aragon (ITA), María de Luna 7, 50018 Zaragoza, Spain. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 192 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development and Innovation of the Republic of Serbia, FCT, European Regional Development Fund (ERDF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A review of different modeling techniques, specifically in the framework of carbon-based nanomaterials (CNMs, including nanoparticles such as graphene and carbon nanotubes—CNTs) and the composites and devices that can be derived from them, is presented. The article emphasizes that the overall performance of these materials depends on mechanisms that operate across different time and spatial scales, requiring tailored approaches based on the material type, size, internal structure/configuration, and the specific properties of interest. Far from attempting to cover the entire spectrum of models, this review examines a wide range of analysis and simulation techniques, highlighting their potential use, some of their weaknesses and strengths, and presenting the latest developments and some application examples. In this way, it is shown how modeling can provide key information for tailoring or designing new materials for specific components or systems or to obtain certain functionalities. At the same time, it is revealed to be an area constantly undergoing development and improvement, as evidenced by the progress made by various of these techniques and the new modeling approaches that have emerged in recent years.

Schlagwörter

Stichwörter der Autor:innen

CNTGFETcarboncarbon-based materialscontinuum modelselectronicgraphenemolecular dynamicsnanocomposites

Autor:innen und Institutionen

  • Materials and Components Division, Technological Institute of Aragon (ITA), María de Luna 7, 50018 Zaragoza, Spain.
  • Department of Atomic Physics, Vinča Institute of Nuclear Sciences-National Institute of the Republic of Serbia, University of Belgrade, P.O. Box 522, 11001 Belgrade, Serbia.
  • Department of Energy "Galileo Ferraris", Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy.
  • Department of Electronics, Telecommunication and Computers, Lisbon School of Engineering (ISEL)/Polytechnic University of Lisbon (IPL), Rua Conselheiro Emídio Navarro, nº1, 1959-007 Lisboa, Portugal.
  • CTS-Centre of Technology and Systems and Associated Lab of Intelligent Systems (LASI), 2829-516 Caparica, Portugal.

ORCID-Profile: Agustίn Chiminelli, Ivan Radović, Matteo Fasano, Alessandro Fantoni, Manuel Laspalas, Ana Kalinić, Marina Provenzano, Miguel Fernandes

Förderung

  • Ministry of Science, Technological Development and Innovation of the Republic of Serbia
  • FCT
  • European Regional Development Fund (ERDF)
  • Portuguese FCT program, Center of Technology and Systems (CTS)

Zitieren

APA

Chiminelli, A., Radović, I., Fasano, M., Fantoni, A., Laspalas, M., Kalinić, A., Provenzano, M., & Fernandes, M. (2024). Modeling Carbon-Based Nanomaterials (CNMs) and Derived Composites and Devices. Sensors, 24(23), 7665. https://doi.org/10.3390/s24237665

Vancouver

Chiminelli A, Radović I, Fasano M, Fantoni A, Laspalas M, Kalinić A, et al. Modeling Carbon-Based Nanomaterials (CNMs) and Derived Composites and Devices. Sensors. 2024;24(23):7665. doi:10.3390/s24237665

BibTeX
@article{Chiminelli2024,
  author = {Chiminelli, Agustίn and Radović, Ivan and Fasano, Matteo and Fantoni, Alessandro and Laspalas, Manuel and Kalinić, Ana and Provenzano, Marina and Fernandes, Miguel},
  title = {Modeling Carbon-Based Nanomaterials (CNMs) and Derived Composites and Devices},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {23},
  pages = {7665},
  doi = {10.3390/s24237665}
}
Kostenlos starten →