EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A High-Sensitivity Fiber Optic Soil Moisture Sensor Based on D-Shaped Fiber and Tin Oxide Thin Film Coatings

Chuen-Lin Tien iD, Hsi-Fu Shih, Jia-Kai Tien, Ching-Chiun Wang

Sensors · 23.11.2024 · 24 (23) · 7474

DOI: 10.3390/s24237474 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 23.11.2024. Verfasst von Chuen-Lin Tien und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical Engineering, Feng Chia University, Taichung 40724, Taiwan. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology of Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We present a high-sensitivity fiber optic soil moisture sensor based on side-polished multimode fibers and lossy mode resonance (LMR). The multimode fibers (MMFs), after side-polishing to form a D-shaped structure, are coated with a single-layer SnO2 thin film by electron beam evaporation with ion-assisted deposition technology. The LMR effect can be obtained when the refractive index of the thin film is positive and greater than its extinction coefficient and the real part of the external medium permittivity. The D-shaped fiber optic soil moisture sensor was placed in soil, allowing moisture to penetrate into the thin film microstructure, and it observed the resonance wavelength shift in LMR spectra to measure the relative humidity change in soil. Meanwhile, an Arduino electronic soil moisture sensing module was used as the experimental control group, with soil relative humidity ranging from 10%RH to 90%RH. We found that the D-shaped fiber with a residual thickness of 93 μm and SnO2 thin film thickness of 450 nm had a maximum sensitivity of 2.29 nm/%RH, with relative humidity varying from 10%RH to 90%RH. The D-shaped fiber also demonstrates a fast response time and good reproducibility.

Schlagwörter

Stichwörter der Autor:innen

D-shaped fiberlossy mode resonancesoil moisture sensorthin film

Autor:innen und Institutionen

  • Department of Electrical Engineering, Feng Chia University, Taichung 40724, Taiwan.
  • Department of Mechanical Engineering, National Chung Hsing University, Taichung 402202, Taiwan.
  • Graduate Institute of Library & Information Science, National Chung Hsing University, Taichung 402202, Taiwan.
  • Mechanical and Systems Research Laboratory, Industrial Technology Research Institute, Hsinchu 310401, Taiwan.

ORCID-Profile: Chuen-Lin Tien

Förderung

  • National Science and Technology of Council

Zitieren

APA

Tien, C. L., Shih, H. F., Tien, J. K., & Wang, C. C. (2024). A High-Sensitivity Fiber Optic Soil Moisture Sensor Based on D-Shaped Fiber and Tin Oxide Thin Film Coatings. Sensors, 24(23), 7474. https://doi.org/10.3390/s24237474

Vancouver

Tien CL, Shih HF, Tien JK, Wang CC. A High-Sensitivity Fiber Optic Soil Moisture Sensor Based on D-Shaped Fiber and Tin Oxide Thin Film Coatings. Sensors. 2024;24(23):7474. doi:10.3390/s24237474

BibTeX
@article{Tien2024,
  author = {Tien, Chuen-Lin and Shih, Hsi-Fu and Tien, Jia-Kai and Wang, Ching-Chiun},
  title = {A High-Sensitivity Fiber Optic Soil Moisture Sensor Based on D-Shaped Fiber and Tin Oxide Thin Film Coatings},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {23},
  pages = {7474},
  doi = {10.3390/s24237474}
}
Kostenlos starten →