Differential Positioning with Bluetooth Low Energy (BLE) Beacons for UAS Indoor Operations: Analysis and Results
Sensors · 08.11.2024 · 24 (22) · 7170
DOI: 10.3390/s24227170 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 08.11.2024. Verfasst von Salvatore Ponte und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering, University of Campania "L. Vanvitelli", 81031 Aversa, Italy. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Naples “Parthenope” (Italy) Internal Research Project DIC.
Abstract (Originalsprache)
Localization of unmanned aircraft systems (UASs) in indoor scenarios and GNSS-denied environments is a difficult problem, particularly in dynamic scenarios where traditional on-board equipment (such as LiDAR, radar, sonar, camera) may fail. In the framework of autonomous UAS missions, precise feedback on real-time aircraft position is very important, and several technologies alternative to GNSS-based approaches for UAS positioning in indoor navigation have been recently explored. In this paper, we propose a low-cost IPS for UAVs, based on Bluetooth low energy (BLE) beacons, which exploits the RSSI (received signal strength indicator) for distance estimation and positioning. Distance information from measured RSSI values can be degraded by multipath, reflection, and fading that cause unpredictable variability of the RSSI and may lead to poor-quality measurements. To enhance the accuracy of the position estimation, this work applies a differential distance correction (DDC) technique, similar to differential GNSS (DGNSS) and real-time kinematic (RTK) positioning. The method uses differential information from a reference station positioned at known coordinates to correct the position of the rover station. A mathematical model was established to analyze the relation between the RSSI and the distance from Bluetooth devices (Eddystone BLE beacons) placed in the indoor operation field. The master reference station was a Raspberry Pi 4 model B, and the rover (unknown target) was an Arduino Nano 33 BLE microcontroller, which was mounted on-board a UAV. Position estimation was achieved by trilateration, and the extended Kalman filter (EKF) was applied, considering the nonlinear propriety of beacon signals to correct data from noise, drift, and bias errors. Experimental results and system performance analysis show the feasibility of this methodology, as well as the reduction of position uncertainty obtained by the DCC technique.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Engineering, University of Campania "L. Vanvitelli", 81031 Aversa, Italy.
- Department of Science and Technology, University of Naples "Parthenope", 80133 Naples, Italy.
ORCID-Profile: Salvatore Ponte, Gennaro Ariante
Förderung
- University of Naples “Parthenope” (Italy) Internal Research Project DIC
Zitieren
APA
Ponte, S., Ariante, G., Greco, A., & Del Core, G. (2024). Differential Positioning with Bluetooth Low Energy (BLE) Beacons for UAS Indoor Operations: Analysis and Results. Sensors, 24(22), 7170. https://doi.org/10.3390/s24227170
Vancouver
Ponte S, Ariante G, Greco A, Del Core G. Differential Positioning with Bluetooth Low Energy (BLE) Beacons for UAS Indoor Operations: Analysis and Results. Sensors. 2024;24(22):7170. doi:10.3390/s24227170
BibTeX
@article{Ponte2024,
author = {Ponte, Salvatore and Ariante, Gennaro and Greco, Alberto and Del Core, Giuseppe},
title = {Differential Positioning with Bluetooth Low Energy (BLE) Beacons for UAS Indoor Operations: Analysis and Results},
journal = {Sensors},
year = {2024},
volume = {24},
number = {22},
pages = {7170},
doi = {10.3390/s24227170}
}
EUVIMED