EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improved EMAT Sensor Design for Enhanced Ultrasonic Signal Detection in Steel Wire Ropes

Immanuel Rossteutscher, Oliver Blaschke, Florian Dötzer iD, Thorsten Uphues iD, Klaus Stefan Drese iD

Sensors · 05.11.2024 · 24 (22) · 7114

DOI: 10.3390/s24227114 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 05.11.2024. Verfasst von Immanuel Rossteutscher und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Sensor and Actuator Technology, Coburg University of Applied Sciences and Arts, Am Hofbräuhaus 1B, 96450 Coburg, Germany. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry for Economic Affairs and Climate Action (BMWK), Federal Ministry for Economic Affairs and Climate Action (BMWK) on the basis of a decision by the German Bundestag, Technologieallianz Oberfranken (TAO).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study is focused on optimizing electromagnetic acoustic transducer (EMAT) sensors for enhanced ultrasonic guided wave signal generation in steel cables using CAD and modern manufacturing to enable contactless ultrasonic signal transmission and reception. A lab test rig with advanced measurement and data processing was set up to test the sensors’ ability to detect cable damage, like wire breaks and abrasion, while also examining the effect of potential disruptors such as rope soiling. Machine learning algorithms were applied to improve the damage detection accuracy, leading to significant advancements in magnetostrictive measurement methods and providing a new standard for future development in this area. The use of the Vision Transformer Masked Autoencoder Architecture (ViTMAE) and generative pre-training has shown that reliable damage detection is possible despite the considerable signal fluctuations caused by rope movement.

Schlagwörter

Stichwörter der Autor:innen

EMATelectromagnetic acoustic transducersneural networkpre-trainingsteel ropetransformerultrasonicwire breaks

Autor:innen und Institutionen

  • Institute for Sensor and Actuator Technology, Coburg University of Applied Sciences and Arts, Am Hofbräuhaus 1B, 96450 Coburg, Germany.
  • Department of Mechanical Engineering, Technische Universität Ilmenau, Ehrenbergstraße 29, 98693 Ilmenau, Germany.

ORCID-Profile: Florian Dötzer, Thorsten Uphues, Klaus Stefan Drese

Förderung

  • Federal Ministry for Economic Affairs and Climate Action (BMWK)
  • Federal Ministry for Economic Affairs and Climate Action (BMWK) on the basis of a decision by the German Bundestag
  • Technologieallianz Oberfranken (TAO)

Zitieren

APA

Rossteutscher, I., Blaschke, O., Dötzer, F., Uphues, T., & Drese, K. S. (2024). Improved EMAT Sensor Design for Enhanced Ultrasonic Signal Detection in Steel Wire Ropes. Sensors, 24(22), 7114. https://doi.org/10.3390/s24227114

Vancouver

Rossteutscher I, Blaschke O, Dötzer F, Uphues T, Drese KS. Improved EMAT Sensor Design for Enhanced Ultrasonic Signal Detection in Steel Wire Ropes. Sensors. 2024;24(22):7114. doi:10.3390/s24227114

BibTeX
@article{Rossteutscher2024,
  author = {Rossteutscher, Immanuel and Blaschke, Oliver and Dötzer, Florian and Uphues, Thorsten and Drese, Klaus Stefan},
  title = {Improved EMAT Sensor Design for Enhanced Ultrasonic Signal Detection in Steel Wire Ropes},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {22},
  pages = {7114},
  doi = {10.3390/s24227114}
}
Kostenlos starten →