Digitizing the Appearance of 3D Printing Materials Using a Spectrophotometer
Sensors · 31.10.2024 · 24 (21) · 7025
DOI: 10.3390/s24217025 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 31.10.2024. Verfasst von Alina Pranovich und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Mathematics and Computer Science, Technical University of Denmark, 2800 Kongens Lyngby, Denmark. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement, Innovation Fund Denmark, Villum Fonden.
Abstract (Originalsprache)
The conventional approach to appearance prediction for 3D printed parts is to print a thin slab of material and measure its reflectance or transmittance with a spectrophotometer. Reflectance works for opaque printing materials. Transmittance works for transparent printing materials. However, the conventional approach does not work convincingly for translucent materials. For these, we need to separate scattering and absorption. We suggest printing a collection of thin slabs of different thicknesses and using these in a spectrophotometer to obtain the scattering and absorption properties of the material. A model is fitted to the measured data in order to estimate the scattering and absorption properties. To this end, we compare the use of Monte Carlo light transport simulation and the use of an analytic model that we developed from the theory of radiative transfer in plane-parallel media. We assess the predictive capabilities of our method through a multispectral photo-render comparison based on the estimated optical properties.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Applied Mathematics and Computer Science, Technical University of Denmark, 2800 Kongens Lyngby, Denmark.
- Department of Science and Technology, Linköping University, 602 33 Norrköping, Sweden.
- 3Shape, 1059 Copenhagen, Denmark.
ORCID-Profile: Alina Pranovich, Morten Rieger Hannemose, Janus Nørtoft Jensen, Duc Minh Tran, Henrik Aanæs, Sasan Gooran, Daniel Nyström, Jeppe Revall Frisvad
Förderung
- European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement
- Innovation Fund Denmark
- Villum Fonden
- European Union’s Horizon 2020 research and innovation program
- Innovationsfonden
Zitieren
APA
Pranovich, A., Hannemose, M. R., Jensen, J. N., Tran, D. M., Aanæs, H., Gooran, S., Nyström, D., & Frisvad, J. R. (2024). Digitizing the Appearance of 3D Printing Materials Using a Spectrophotometer. Sensors, 24(21), 7025. https://doi.org/10.3390/s24217025
Vancouver
Pranovich A, Hannemose MR, Jensen JN, Tran DM, Aanæs H, Gooran S, et al. Digitizing the Appearance of 3D Printing Materials Using a Spectrophotometer. Sensors. 2024;24(21):7025. doi:10.3390/s24217025
BibTeX
@article{Pranovich2024,
author = {Pranovich, Alina and Hannemose, Morten Rieger and Jensen, Janus Nørtoft and Tran, Duc Minh and Aanæs, Henrik and Gooran, Sasan and Nyström, Daniel and Frisvad, Jeppe Revall},
title = {Digitizing the Appearance of 3D Printing Materials Using a Spectrophotometer},
journal = {Sensors},
year = {2024},
volume = {24},
number = {21},
pages = {7025},
doi = {10.3390/s24217025}
}
EUVIMED