A Step Forward for Smart Clothes: Printed Fabric-Based Hybrid Electronics for Wearable Health Monitoring
Sensors · 2024
DOI: 10.3390/s24216991 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, 2024. Verfasst von Huating Tu und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Medical Instruments, Shanghai University of Medicine & Health Sciences, Shanghai 201318, China. Hauptthemen laut MEDLINE: Wearable Electronic Devices, Textiles. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shanghai Sailing Program, University Research Fund of Shanghai University of Medicine & Health Sciences, State Key Laboratory of New Textile Materials and Advanced Processing Technologies.
Abstract (Originalsprache)
Smart clothes equipped with flexible sensing systems provide a comfortable means to track health status in real time. Although these sensors are flexible and small, the core signal-processing units still rely on a conventional printed circuit board (PCB), making current health-monitoring devices bulky and inconvenient to wear. In this study, a printed fabric-based hybrid circuit was designed and prepared—with a series of characteristics, such as surface/sectional morphology, electrical properties, and stability—to study its reliability. Furthermore, to verify the function of the fabric-based circuit, simulations and measurements of the circuit, as well as the collection and processing of a normal adult’s electrophysiological signals, were conducted. Under 10,000 stretching and bending cycles with a certain elongation and bending angle, the resistance remained 0.27 Ω/cm and 0.64 Ω/cm, respectively, demonstrating excellent conductivity and reliability. Additionally, the results of the simulation and experiment showed that the circuit can successfully amplify weak electrocardiogram (ECG) signals with a magnification of 1600 times with environmental filtering and 50 Hz of industrial frequency interference. This technology can monitor human electrophysiological signals, such as ECGs, electromyograms (EMGs), and joint motion, providing valuable practical guidance for the unobtrusive monitoring of smart clothes.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Medical Instruments, Shanghai University of Medicine & Health Sciences, Shanghai 201318, China.
- School of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai 200237, China.
ORCID-Profile: Huating Tu, Yang Gao
Förderung
- Shanghai Sailing Program
- University Research Fund of Shanghai University of Medicine & Health Sciences
- State Key Laboratory of New Textile Materials and Advanced Processing Technologies
- University Research Fund of Shanghai University of Medicine & Health Sciences
Zitieren
APA
Tu, H., Li, Z., Chen, Z., Gao, Y., & Xuan, F. (2024). A Step Forward for Smart Clothes: Printed Fabric-Based Hybrid Electronics for Wearable Health Monitoring. Sensors. https://doi.org/10.3390/s24216991
Vancouver
Tu H, Li Z, Chen Z, Gao Y, Xuan F. A Step Forward for Smart Clothes: Printed Fabric-Based Hybrid Electronics for Wearable Health Monitoring. Sensors. 2024. doi:10.3390/s24216991
BibTeX
@article{Tu2024,
author = {Tu, Huating and Li, Zhenglin and Chen, Zihao and Gao, Yang and Xuan, Fuzhen},
title = {A Step Forward for Smart Clothes: Printed Fabric-Based Hybrid Electronics for Wearable Health Monitoring},
journal = {Sensors},
year = {2024},
doi = {10.3390/s24216991}
}
EUVIMED