Evaluating Mobile LiDAR Intensity Data for Inventorying Durable Tape Pavement Markings
Sensors · 17.10.2024 · 24 (20) · 6694
DOI: 10.3390/s24206694 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 17.10.2024. Verfasst von Gregory L Brinster und 6 weiteren Autor:innen. Beteiligte Einrichtung: Joint Transportation Research Program, Lyles School of Civil and Construction Engineering, College of Engineering, Purdue University, West Lafayette,…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Indiana Department of Transportation, Joint Transportation Research Program, administered by the Indiana Department of Transportation and Purdue University.
Abstract (Originalsprache)
Good visibility of lane markings is important for all road users, particularly autonomous vehicles. In general, nighttime retroreflectivity is one of the most challenging marking visibility characteristics for agencies to monitor and maintain, particularly in cold weather climates where agency snowplows remove retroreflective material during winter operations. Traditional surface-applied paint and glass beads typically only last one season in cold weather climates with routine snowplow activity. Recently, transportation agencies in cold weather climates have begun deploying improved recessed, durable pavement markings that can last several years and have very high retroreflective properties. Several dozen installations may occur in a state in any calendar year, presenting a challenge for states that need to program annual repainting of traditional waterborne paint lines, but not paint over the much more costly durable markings. This study reports on the utilization of mobile mapping LiDAR systems to classify and evaluate pavement markings along a 73-mile section of westbound I-74 in Indiana. LiDAR intensity data can be used to classify pavement markings as either tape or non-tape and then identify areas of tape markings that need maintenance. RGB images collected during LiDAR intensity data collection were used to validate the LiDAR classification. These techniques can be used by agencies to develop accurate pavement marking inventories to ensure that only painted lines (or segments with missing tape) are repainted during annual maintenance. Repeated tests can also track the marking intensity over time, allowing agencies to better understand material lifecycles.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Joint Transportation Research Program, Lyles School of Civil and Construction Engineering, College of Engineering, Purdue University, West Lafayette, IN 47907, USA.
- Indiana Department of Transportation, 100 N Senate Ave, Marion County, Indianapolis, IN 46204, USA.
ORCID-Profile: Gregory L Brinster, Aser M Eissa, Ayman Habib, Darcy M Bullock
Förderung
- Indiana Department of Transportation
- Joint Transportation Research Program, administered by the Indiana Department of Transportation and Purdue University
Zitieren
APA
Brinster, G. L., Hodaei, M., Eissa, A. M., DeLoach, Z., Bruno, J. E., Habib, A., & Bullock, D. M. (2024). Evaluating Mobile LiDAR Intensity Data for Inventorying Durable Tape Pavement Markings. Sensors, 24(20), 6694. https://doi.org/10.3390/s24206694
Vancouver
Brinster GL, Hodaei M, Eissa AM, DeLoach Z, Bruno JE, Habib A, et al. Evaluating Mobile LiDAR Intensity Data for Inventorying Durable Tape Pavement Markings. Sensors. 2024;24(20):6694. doi:10.3390/s24206694
BibTeX
@article{Brinster2024,
author = {Brinster, Gregory L and Hodaei, Mona and Eissa, Aser M and DeLoach, Zach and Bruno, Joseph E and Habib, Ayman and Bullock, Darcy M},
title = {Evaluating Mobile LiDAR Intensity Data for Inventorying Durable Tape Pavement Markings},
journal = {Sensors},
year = {2024},
volume = {24},
number = {20},
pages = {6694},
doi = {10.3390/s24206694}
}
EUVIMED