EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultrasonic Weld Quality Inspection Involving Strength Prediction and Defect Detection in Data-Constrained Training Environments

Reenu Mohandas iD, Patrick Mongan iD, Martin Hayes iD

Sensors · 11.10.2024 · 24 (20) · 6553

DOI: 10.3390/s24206553 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 11.10.2024. Verfasst von Reenu Mohandas und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronic and Computer Engineering, University of Limerick, V94 T9PX Limerick, Ireland. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Foundation Ireland, University of Limerick.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Welding is an extensively used technique in manufacturing, and as for every other process, there is the potential for defects in the weld joint that could be catastrophic to the manufactured products. Different welding processes use different parameter settings, which greatly impact the quality of the final welded products. The focus of research in weld defect detection is to develop a non-destructive testing method for weld quality assessment based on observing the weld with an RGB camera. Deep learning techniques have been widely used in the domain of weld defect detection in recent times, but the majority of them use, for example, X-ray images. An RGB image-based solution is attractive, as RGB cameras are comparatively inexpensive compared to X-ray image solutions. However, the number of publicly available RGB image datasets for weld defect detection is comparatively lower than that of X-ray image datasets. This work achieves a complete weld quality assessment involving lap shear strength prediction and visual weld defect detection from an extremely limited dataset. First, a multimodal dataset is generated by the fusion of image data features extracted using a convolutional autoencoder (CAE) designed in this experiment and input parameter settings data. The fusion of the dataset reduced lap shear strength (LSS) prediction errors by 34% compared to prediction errors using only input parameter settings data. This is a promising result, considering the extremely small dataset size. This work also achieves visual weld defect detection on the same limited dataset with the help of an ultrasonic weld defect dataset generated using offline and online data augmentation. The weld defect detection achieves an accuracy of 74%, again a promising result that meets standard requirements. The combination of lap shear strength prediction and visual defect detection leads to a complete inspection to avoid premature failure of the ultrasonic weld joints. The weld defect detection was compared against the publicly available image dataset for surface defect detection.

Schlagwörter

Stichwörter der Autor:innen

autoencoderconvolutional autoencoder (CAE)ultrasonic welding (USW)weld defect detectionweld strength prediction

Autor:innen und Institutionen

  • Department of Electronic and Computer Engineering, University of Limerick, V94 T9PX Limerick, Ireland.
  • Confirm Smart Manufacturing Research Centre, V94 T9PX Limerick, Ireland.
  • School of Engineering, University of Limerick, V94 T9PX Limerick, Ireland.

ORCID-Profile: Reenu Mohandas, Patrick Mongan, Martin Hayes

Förderung

  • Science Foundation Ireland
  • University of Limerick

Zitieren

APA

Mohandas, R., Mongan, P., & Hayes, M. (2024). Ultrasonic Weld Quality Inspection Involving Strength Prediction and Defect Detection in Data-Constrained Training Environments. Sensors, 24(20), 6553. https://doi.org/10.3390/s24206553

Vancouver

Mohandas R, Mongan P, Hayes M. Ultrasonic Weld Quality Inspection Involving Strength Prediction and Defect Detection in Data-Constrained Training Environments. Sensors. 2024;24(20):6553. doi:10.3390/s24206553

BibTeX
@article{Mohandas2024,
  author = {Mohandas, Reenu and Mongan, Patrick and Hayes, Martin},
  title = {Ultrasonic Weld Quality Inspection Involving Strength Prediction and Defect Detection in Data-Constrained Training Environments},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {20},
  pages = {6553},
  doi = {10.3390/s24206553}
}
Kostenlos starten →