EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analyzing Optimal Wearable Motion Sensor Placement for Accurate Classification of Fall Directions

Sokea Teng iD, Jung-Yeon Kim iD, Seob Jeon iD, Hyo-Wook Gil iD, Jiwon Lyu, Euy Hyun Chung, Kwang Seock Kim iD, Yunyoung Nam iD

Sensors · 2024

DOI: 10.3390/s24196432 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2024. Verfasst von Sokea Teng und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of ICT Convergence, Soonchunhyang University, Asan 31538, Republic of Korea. Hauptthemen laut MEDLINE: Accidental Falls, Wearable Electronic Devices, Accelerometry, Support Vector Machine. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Health & Welfare, Republic of Korea, Korea Health Technology R&D Project through the Korea Health Industry Development Institute (KHIDI), National Research Foundation of Korea (NRF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Falls represent a significant risk factor, necessitating accurate classification methods. This study aims to identify the optimal placement of wearable sensors—specifically accelerometers, gyroscopes, and magnetometers—for effective fall-direction classification. Although previous research identified optimal sensor locations for distinguishing falls from non-falls, limited attention has been given to the classification of fall direction across different body regions. This study assesses inertial measurement unit (IMU) sensors placed at 12 distinct body locations to determine the most effective positions for capturing fall-related data. The research was conducted in three phases: first, comparing classifiers across all sensor locations to identify the most effective; second, evaluating performance differences between sensors placed on the left and right sides of the body; and third, exploring the efficacy of combining sensors from the upper and lower body regions. Statistical analyses of the results for the most effective classifier model demonstrate that the support vector machine (SVM) is more effective than other classifiers across all sensor locations, with statistically significant differences in performance. At the same time, the comparison between the left and right sensor locations shows no significant performance differences within the same anatomical areas. Regarding optimal sensor placement, the findings indicate that sensors positioned on the pelvis and upper legs in the lower body, as well as on the shoulder and head in the upper body, were the most effective results for accurate fall-direction classification. The study concludes that the optimal sensor configuration for fall-direction classification involves strategically combining sensors placed on the pelvis, upper legs, and lower legs.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Accidental FallsWearable Electronic DevicesAccelerometrySupport Vector MachineHumansMaleFemaleAdultMotionYoung Adult

Stichwörter der Autor:innen

IMU sensorsclassificationdaily life activityfall directionfallsfeature extractionmachine learningoptimal sensorsensor location

Autor:innen und Institutionen

  • Department of ICT Convergence, Soonchunhyang University, Asan 31538, Republic of Korea.
  • ICT Convergence Research Center, Soonchunhyang University, Asan 31538, Republic of Korea.
  • Department of Obstetrics and Gynecology, Soonchunhyang University Cheonan Hospital, Cheonan 31151, Republic of Korea.
  • Department of Internal Medicine, Soonchunhyang University Cheonan Hospital, Cheonan 31151, Republic of Korea.
  • Division of Respiratory Medicine, Department of Internal Medicine, Soonchunhyang University Cheonan Hospital, Cheonan 31151, Republic of Korea.
  • Department of Dermatology, College of Medicine, Soonchunhyang University Cheonan Hospital, Cheonan 31151, Republic of Korea.

ORCID-Profile: Sokea Teng, Jung-Yeon Kim, Seob Jeon, Hyo-Wook Gil, Kwang Seock Kim, Yunyoung Nam

Förderung

  • Ministry of Health & Welfare, Republic of Korea
  • Korea Health Technology R&D Project through the Korea Health Industry Development Institute (KHIDI)
  • National Research Foundation of Korea (NRF)
  • Korea government (MSIT)
  • Korea Health Technology R&D Project through the Korea Health Industry Development Institute (KHIDI)
  • Ministry of Health & Welfare, Republic of Korea
  • Soonchunhyang University Research Fund

Zitieren

APA

Teng, S., Kim, J. Y., Jeon, S., Gil, H. W., Lyu, J., Chung, E. H., Kim, K. S., & Nam, Y. (2024). Analyzing Optimal Wearable Motion Sensor Placement for Accurate Classification of Fall Directions. Sensors. https://doi.org/10.3390/s24196432

Vancouver

Teng S, Kim JY, Jeon S, Gil HW, Lyu J, Chung EH, et al. Analyzing Optimal Wearable Motion Sensor Placement for Accurate Classification of Fall Directions. Sensors. 2024. doi:10.3390/s24196432

BibTeX
@article{Teng2024,
  author = {Teng, Sokea and Kim, Jung-Yeon and Jeon, Seob and Gil, Hyo-Wook and Lyu, Jiwon and Chung, Euy Hyun and Kim, Kwang Seock and Nam, Yunyoung},
  title = {Analyzing Optimal Wearable Motion Sensor Placement for Accurate Classification of Fall Directions},
  journal = {Sensors},
  year = {2024},
  doi = {10.3390/s24196432}
}
Kostenlos starten →