EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Adaptive RF Front-End Architecture for Multi-Band SDR in Avionics

Behnam Shakibafar, Farzan Farhangian, Jean-Marc Gagne, Rene Jr Landry, Frederic Nabki iD

Sensors · 14.09.2024 · 24 (18) · 5963

DOI: 10.3390/s24185963 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 14.09.2024. Verfasst von Behnam Shakibafar und 4 weiteren Autor:innen. Beteiligte Einrichtung: LASSENA Laboratory, Department of Electrical Engineering, École de Technologie Supérieure, Montreal, QC H3C-1K3, Canada. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study introduces a reconfigurable and agile RF front-end (RFFE) architecture that significantly enhances the performance of software-defined radios (SDRs) by seamlessly adjusting to varying signal requirements, frequencies, and protocols. This flexibility greatly enhances spectrum utilization, signal integrity, and overall system efficiency—critical factors in aviation, where reliable communication, navigation, and surveillance systems are vital for safety. A versatile RF front-end is thus indispensable, enhancing connectivity and safety standards. We explore the integration of this flexible RF front-end in SDRs, focusing on the detailed design of essential components, such as receivers, transmitters, RF switches, combiners, and splitters, and their corresponding RF pathways. Comprehensive performance evaluations confirm the architecture’s reliability and functionality, including an extensive analysis of receiver gain, linearity, and two-tone test results. These assessments validate the architecture’s suitability for aviation radios and address considerations of size, weight, and power-cost (SWaP-C), demonstrating significant gains in operational efficiency and cost-effectiveness. The introduction of the new RF front-end on a single SDR board not only substantially reduces size and weight but also adds up to 18 dB gain to the received signal. It also allows for a high level of design flexibility, enabling seamless software transitions between different radios and the capacity to manage three times more radios with the same hardware, thereby significantly boosting the system’s ability to handle multiple radio channels efficiently.

Schlagwörter

Stichwörter der Autor:innen

SDRavionicsfront-endsoftware defined receiver

Autor:innen und Institutionen

  • LASSENA Laboratory, Department of Electrical Engineering, École de Technologie Supérieure, Montreal, QC H3C-1K3, Canada.

ORCID-Profile: Frederic Nabki

Zitieren

APA

Shakibafar, B., Farhangian, F., Gagne, J. M., Landry, R. J., & Nabki, F. (2024). An Adaptive RF Front-End Architecture for Multi-Band SDR in Avionics. Sensors, 24(18), 5963. https://doi.org/10.3390/s24185963

Vancouver

Shakibafar B, Farhangian F, Gagne JM, Landry RJ, Nabki F. An Adaptive RF Front-End Architecture for Multi-Band SDR in Avionics. Sensors. 2024;24(18):5963. doi:10.3390/s24185963

BibTeX
@article{Shakibafar2024,
  author = {Shakibafar, Behnam and Farhangian, Farzan and Gagne, Jean-Marc and Landry, Rene Jr and Nabki, Frederic},
  title = {An Adaptive RF Front-End Architecture for Multi-Band SDR in Avionics},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {18},
  pages = {5963},
  doi = {10.3390/s24185963}
}
Kostenlos starten →