Unity and ROS as a Digital and Communication Layer for Digital Twin Application: Case Study of Robotic Arm in a Smart Manufacturing Cell
Sensors · 31.08.2024 · 24 (17) · 5680
DOI: 10.3390/s24175680 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 31.08.2024. Verfasst von Maulshree Singh und 6 weiteren Autor:innen. Beteiligte Einrichtung: Polymer, Recycling, Industrial, Sustainability and Manufacturing Research Institute, Athlone Campus, Technological University of Shannon: Midland and…. Die Arbeit wurde bisher 45-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Foundation Ireland.
Abstract (Originalsprache)
A digital twin (DT) is a virtual/digital model of any physical object (physical twin), interconnected through data exchange. In the context of Industry 4.0, DTs are integral to intelligent automation driving innovation at scale by providing significant improvements in precision, flexibility, and real-time responsiveness. A critical challenge in developing DTs is achieving a model that reflects real-time conditions with precision and flexibility. This paper focuses on evaluating latency and accuracy, key metrics for assessing the efficacy of a DT, which often hinder scalability and adaptability in robotic applications. This article presents a comprehensive framework for developing DTs using Unity and Robot Operating System (ROS) as the main layers of digitalization and communication. The MoveIt package was used for motion planning and execution for the robotic arm, showcasing the framework’s versatility independent of proprietary constraints. Leveraging the versatility and open-source nature of these tools, the framework ensures interoperability, adaptability, and scalability, crucial for modern smart manufacturing applications. Our approach was validated by conducting extensive accuracy and latency tests. We measured latency by timestamping messages exchanged between the physical and digital twin, achieving a latency of 77.67 ms. Accuracy was assessed by comparing the joint positions of the DT and the physical robotic arm over multiple cycles, resulting in an accuracy rate of 99.99%. The results highlight the potential of DTs in enhancing operational efficiency and decision-making in manufacturing environments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Polymer, Recycling, Industrial, Sustainability and Manufacturing Research Institute, Athlone Campus, Technological University of Shannon: Midland and Midwest, N37 HD68 Athlone, Ireland.
- Software Research Institute, Athlone Campus, Technological University of Shannon: Midland and Midwest, N37 HD68 Athlone, Ireland.
ORCID-Profile: Maulshree Singh, Jayasekara Kapukotuwa, Eber Lawrence Souza Gouveia, Evert Fuenmayor, Yuansong Qiao, Declan Devine
Förderung
- Science Foundation Ireland
Zitieren
APA
Singh, M., Kapukotuwa, J., Gouveia, E. L. S., Fuenmayor, E., Qiao, Y., Murry, N., & Devine, D. (2024). Unity and ROS as a Digital and Communication Layer for Digital Twin Application: Case Study of Robotic Arm in a Smart Manufacturing Cell. Sensors, 24(17), 5680. https://doi.org/10.3390/s24175680
Vancouver
Singh M, Kapukotuwa J, Gouveia ELS, Fuenmayor E, Qiao Y, Murry N, et al. Unity and ROS as a Digital and Communication Layer for Digital Twin Application: Case Study of Robotic Arm in a Smart Manufacturing Cell. Sensors. 2024;24(17):5680. doi:10.3390/s24175680
BibTeX
@article{Singh2024,
author = {Singh, Maulshree and Kapukotuwa, Jayasekara and Gouveia, Eber Lawrence Souza and Fuenmayor, Evert and Qiao, Yuansong and Murry, Niall and Devine, Declan},
title = {Unity and ROS as a Digital and Communication Layer for Digital Twin Application: Case Study of Robotic Arm in a Smart Manufacturing Cell},
journal = {Sensors},
year = {2024},
volume = {24},
number = {17},
pages = {5680},
doi = {10.3390/s24175680}
}
EUVIMED