EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Robotic Valve Turning with a Wheeled Mobile Manipulator via Hybrid Passive/Active Compliance

Hongjun Xing iD, Liang Ding, Jinbao Chen, Haibo Gao, Zongquan Deng

Sensors · 28.08.2024 · 24 (17) · 5559

DOI: 10.3390/s24175559 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 28.08.2024. Verfasst von Hongjun Xing und 4 weiteren Autor:innen. Beteiligte Einrichtung: National Key Laboratory of Aerospace Mechanism, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Jiangsu Province, National Natural Science Foundation of China, State Key Laboratory of Robotics and Systems (HIT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper addresses the problems of valve-turning operation in rescue environments where a wheeled mobile manipulator (WMM) is employed, including the possible occurrence of large internal forces. Rather than attempting to obtain the exact position of the valve, this paper presents a solution to two main problems in robotic valve-turning operations: the radial position deviation between the rotation axes of the tool and the valve handle, which may cause large radial forces, and the possible axial displacement of the valve handle as the valve turns, which may lead to large axial forces. For the former problem, we designed a compliant end-effector with a tolerance of approximately 3.5° (angle) and 9.7 mm (position), and provided a hybrid passive/active compliance method. For the latter problem, a passivity-based force tracking algorithm was employed. Combining the custom-built compliant end-effector and the passivity-based control method can significantly reduce both the radial and the axial forces. Additionally, for valves with different installation types and WMMs with different configurations, we analyzed the minimum required number of actuators for valve turning. Simulation and experimental results are presented to show the effectiveness of the proposed approach.

Schlagwörter

Stichwörter der Autor:innen

compliant end-effectorhybrid passive/active compliancepassivity-based force tracking controlrobotic valve turningwheeled mobile manipulator

Autor:innen und Institutionen

  • National Key Laboratory of Aerospace Mechanism, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China.
  • State Key Laboratory of Robotics and System, Harbin Institute of Technology, Harbin 150001, China.

ORCID-Profile: Hongjun Xing

Förderung

  • Natural Science Foundation of Jiangsu Province
  • National Natural Science Foundation of China
  • State Key Laboratory of Robotics and Systems (HIT)
  • National Key Research and Development Program of China
  • “111” Project

Zitieren

APA

Xing, H., Ding, L., Chen, J., Gao, H., & Deng, Z. (2024). Robotic Valve Turning with a Wheeled Mobile Manipulator via Hybrid Passive/Active Compliance. Sensors, 24(17), 5559. https://doi.org/10.3390/s24175559

Vancouver

Xing H, Ding L, Chen J, Gao H, Deng Z. Robotic Valve Turning with a Wheeled Mobile Manipulator via Hybrid Passive/Active Compliance. Sensors. 2024;24(17):5559. doi:10.3390/s24175559

BibTeX
@article{Xing2024,
  author = {Xing, Hongjun and Ding, Liang and Chen, Jinbao and Gao, Haibo and Deng, Zongquan},
  title = {Robotic Valve Turning with a Wheeled Mobile Manipulator via Hybrid Passive/Active Compliance},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {17},
  pages = {5559},
  doi = {10.3390/s24175559}
}
Kostenlos starten →