Collision Avoidance Path Planning and Tracking Control for Autonomous Vehicles Based on Model Predictive Control
Sensors · 12.08.2024 · 24 (16) · 5211
DOI: 10.3390/s24165211 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 12.08.2024. Verfasst von Ding Dong und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Automation, Guangxi University of Science and Technology, Liuzhou 545036, China. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Basic and Applied Basic Research Foundation, Guangxi Key Laboratory of Automobile Components and Vehicle Technology, National Natural Science Foundation of China.
Abstract (Originalsprache)
In response to the fact that autonomous vehicles cannot avoid obstacles by emergency braking alone, this paper proposes an active collision avoidance method for autonomous vehicles based on model predictive control (MPC). The method includes trajectory tracking, adaptive cruise control (ACC), and active obstacle avoidance under high vehicle speed. Firstly, an MPC-based trajectory tracking controller is designed based on the vehicle dynamics model. Then, the MPC was combined with ACC to design the control strategies for vehicle braking to avoid collisions. Additionally, active steering for collision avoidance was developed based on the safety distance model. Finally, considering the distance between the vehicle and the obstacle and the relative speed, an obstacle avoidance function is constructed. A path planning controller based on nonlinear model predictive control (NMPC) is designed. In addition, the alternating direction multiplier method (ADMM) is used to accelerate the solution process and further ensure the safety of the obstacle avoidance process. The proposed algorithm is tested on the Simulink and CarSim co-simulation platform in both static and dynamic obstacle scenarios. Results show that the method effectively achieves collision avoidance through braking. It also demonstrates good stability and robustness in steering to avoid collisions at high speeds. The experiments confirm that the vehicle can return to the desired path after avoiding obstacles, verifying the effectiveness of the algorithm.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Automation, Guangxi University of Science and Technology, Liuzhou 545036, China.
- Guangxi Key Laboratory of Automobile Components and Vehicle Technology, Guangxi University of Science and Technology, Liuzhou 545036, China.
- School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510641, China.
ORCID-Profile: Hongtao Ye, Wenguang Luo, Jiayan Wen
Förderung
- Guangdong Basic and Applied Basic Research Foundation
- Guangxi Key Laboratory of Automobile Components and Vehicle Technology
- National Natural Science Foundation of China
Zitieren
APA
Dong, D., Ye, H., Luo, W., Wen, J., & Huang, D. (2024). Collision Avoidance Path Planning and Tracking Control for Autonomous Vehicles Based on Model Predictive Control. Sensors, 24(16), 5211. https://doi.org/10.3390/s24165211
Vancouver
Dong D, Ye H, Luo W, Wen J, Huang D. Collision Avoidance Path Planning and Tracking Control for Autonomous Vehicles Based on Model Predictive Control. Sensors. 2024;24(16):5211. doi:10.3390/s24165211
BibTeX
@article{Dong2024,
author = {Dong, Ding and Ye, Hongtao and Luo, Wenguang and Wen, Jiayan and Huang, Dan},
title = {Collision Avoidance Path Planning and Tracking Control for Autonomous Vehicles Based on Model Predictive Control},
journal = {Sensors},
year = {2024},
volume = {24},
number = {16},
pages = {5211},
doi = {10.3390/s24165211}
}
EUVIMED