EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Impact of Pole Spacing on Magnetic Flux Leakage Detection under Oversaturated Magnetization

Wenlong Liu, Lemei Ren, Guansan Tian

Sensors · 11.08.2024 · 24 (16) · 5195

DOI: 10.3390/s24165195 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 11.08.2024. Verfasst von Wenlong Liu und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Thermal Engineering, Shandong Jianzhu University, Jinan 250100, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key R&D Program of Shandong Province, China, Key R&D Program of Shandong Province, China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Magnetic flux leakage (MFL) inspection employs leakage magnetic fields to effectively detect and locate pipeline defects. The spacing between magnetic poles significantly affects the leakage magnetic field strength. While most detectors typically opt for moderate pole spacing for routine detection, this study investigates the propagation characteristics of MFL signals at small pole spacings (under specimen oversaturated magnetization) and their impact on MFL detection. Through finite element simulation and experiments, it reveals a new signal phenomenon in the radial MFL signal By at small pole spacings, the double peak–valley (DPV) phenomenon, characterized by outer and inner peaks and valleys. Theoretical analysis based on the simulation results elucidates the mechanisms for this DPV phenomenon. Based on this, the impact of defect size, pipe wall thickness, and magnetic pole and rigid brush height on MFL signals under small magnetic pole spacings is examined. It is demonstrated that, under a smaller magnetic pole spacing, a potent background magnetic field manifests in the air above the defect. This DPV phenomenon is generated by the magnetic diffusion and compression interactions between the background and defect leakage magnetic fields. Notably, the intensity of the background magnetic field can be mitigated by reducing the height of the rigid brush. In contrast, the pipe wall thickness and magnetic pole height exhibit a negligible influence on the DPV phenomenon. The emergence of the DPV precipitates a reduction in the peak-to-valley difference within the MFL signal, constricting the depth range of detectable defects. However, the presence of DPV increases the identification of defects with smaller opening sizes. These findings reveal the characterization of the MFL signal under small pole spacing, offering a preliminary study on identifying specific defects using unconventional signals. This study provides valuable guidance for MFL detection.

Schlagwörter

Stichwörter der Autor:innen

double peak–valley (DPV) phenomenonleakage magnetic fieldmagnetic flux leakage (MFL)magnetic pole spacing

Autor:innen und Institutionen

  • School of Thermal Engineering, Shandong Jianzhu University, Jinan 250100, China.

Förderung

  • Key R&D Program of Shandong Province, China
  • Key R&D Program of Shandong Province, China

Zitieren

APA

Liu, W., Ren, L., & Tian, G. (2024). Study on the Impact of Pole Spacing on Magnetic Flux Leakage Detection under Oversaturated Magnetization. Sensors, 24(16), 5195. https://doi.org/10.3390/s24165195

Vancouver

Liu W, Ren L, Tian G. Study on the Impact of Pole Spacing on Magnetic Flux Leakage Detection under Oversaturated Magnetization. Sensors. 2024;24(16):5195. doi:10.3390/s24165195

BibTeX
@article{Liu2024,
  author = {Liu, Wenlong and Ren, Lemei and Tian, Guansan},
  title = {Study on the Impact of Pole Spacing on Magnetic Flux Leakage Detection under Oversaturated Magnetization},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {16},
  pages = {5195},
  doi = {10.3390/s24165195}
}
Kostenlos starten →