EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Magnetic Stirring Device for Limiting the Sedimentation of Cells inside Microfluidic Devices

Sebastian Cremaschini iD, Noemi Torriero, Chiara Maceri, Maria Poles, Sarah Cleve, Beatrice Crestani iD, Alessio Meggiolaro, Matteo Pierno iD, Giampaolo Mistura iD, Paola Brun iD, Davide Ferraro iD

Sensors · 2024

DOI: 10.3390/s24155014 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2024. Verfasst von Sebastian Cremaschini und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics and Astronomy, University of Padua, 35131 Padua, Italy. Hauptthemen laut MEDLINE: Lab-On-A-Chip Devices. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Governo Italiano, University of Padua, University of Padova.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In experiments considering cell handling in microchannels, cell sedimentation in the storage container is a key problem because it affects the reproducibility of the experiments. Here, a simple and low-cost cell mixing device (CMD) is presented; the device is designed to prevent the sedimentation of cells in a syringe during their injection into a microfluidic channel. The CMD is based on a slider crank device made of 3D-printed parts that, combined with a permanent magnet, actuate a stir bar placed into the syringe containing the cells. By using A549 cell lines, the device is characterized in terms of cell viability (higher than 95%) in different mixing conditions, by varying the oscillation frequency and the overall mixing time. Then, a dedicated microfluidic experiment is designed to evaluate the injection frequency of the cells within a microfluidic chip. In the presence of the CMD, a higher number of cells are injected into the microfluidic chip with respect to the static conditions (2.5 times), proving that it contrasts cell sedimentation and allows accurate cell handling. For these reasons, the CMD can be useful in microfluidic experiments involving single-cell analysis.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Lab-On-A-Chip DevicesHumansA549 CellsCell SurvivalMicrofluidic Analytical TechniquesMagneticsCell SeparationEquipment DesignSingle-Cell Analysis

Stichwörter der Autor:innen

3D printercell sedimentationmagnetic stirringmicrofabricationmicrofluidics

Autor:innen und Institutionen

  • Department of Physics and Astronomy, University of Padua, 35131 Padua, Italy.
  • Department of Medicine, University of Verona, 37124 Verona, Italy.
  • Department of Molecular Medicine, University of Padua, 35121 Padua, Italy.

ORCID-Profile: Sebastian Cremaschini, Beatrice Crestani, Matteo Pierno, Giampaolo Mistura, Paola Brun, Davide Ferraro

Förderung

  • Governo Italiano
  • University of Padua
  • University of Padova
  • National Recovery and Resilience Plan (NRRP)
  • Italian Ministry of University and Research (MUR)
  • Italian Ministry of Ministry of University and Research (MUR)
  • European Union

Zitieren

APA

Cremaschini, S., Torriero, N., Maceri, C., Poles, M., Cleve, S., Crestani, B., Meggiolaro, A., Pierno, M., Mistura, G., Brun, P., & Ferraro, D. (2024). Magnetic Stirring Device for Limiting the Sedimentation of Cells inside Microfluidic Devices. Sensors. https://doi.org/10.3390/s24155014

Vancouver

Cremaschini S, Torriero N, Maceri C, Poles M, Cleve S, Crestani B, et al. Magnetic Stirring Device for Limiting the Sedimentation of Cells inside Microfluidic Devices. Sensors. 2024. doi:10.3390/s24155014

BibTeX
@article{Cremaschini2024,
  author = {Cremaschini, Sebastian and Torriero, Noemi and Maceri, Chiara and Poles, Maria and Cleve, Sarah and Crestani, Beatrice and Meggiolaro, Alessio and Pierno, Matteo and Mistura, Giampaolo and Brun, Paola and Ferraro, Davide},
  title = {Magnetic Stirring Device for Limiting the Sedimentation of Cells inside Microfluidic Devices},
  journal = {Sensors},
  year = {2024},
  doi = {10.3390/s24155014}
}
Kostenlos starten →