EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wearable Sensor Node for Safety Improvement in Workplaces: Technology Assessment in a Simulated Environment

Fabrizio Formisano iD, Michele Dellutri, Ettore Massera iD, Antonio Del Giudice, Luigi Barretta, Girolamo Di Francia iD

Sensors · 01.08.2024 · 24 (15) · 4993

DOI: 10.3390/s24154993 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 01.08.2024. Verfasst von Fabrizio Formisano und 5 weiteren Autor:innen. Beteiligte Einrichtung: ENEA, 80055 Portici, Italy. Hauptthemen laut MEDLINE: Wearable Electronic Devices, Workplace. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 10 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Economic Development.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Personal protective equipment (PPE) has been universally recognized for its role in protecting workers from injuries and illnesses. Smart PPE integrates Internet of Things (IoT) technologies to enable continuous monitoring of workers and their surrounding environment, preventing undesirable events, facilitating rapid emergency response, and informing rescuers of potential hazards. This work presents a smart PPE system with a sensor node architecture designed to monitor workers and their surroundings. The sensor node is equipped with various sensors and communication capabilities, enabling the monitoring of specific gases (VOC, CO2, CO, O2), particulate matter (PM), temperature, humidity, positional information, audio signals, and body gestures. The system utilizes artificial intelligence algorithms to recognize patterns in worker activity that could lead to risky situations. Gas tests were conducted in a special chamber, positioning capabilities were tested indoors and outdoors, and the remaining sensors were tested in a simulated laboratory environment. This paper presents the sensor node architecture and the results of tests on target risky scenarios. The sensor node performed well in all situations, correctly signaling all cases that could lead to risky situations.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Wearable Electronic DevicesWorkplaceHumansPersonal Protective EquipmentAlgorithmsInternet of ThingsArtificial IntelligenceParticulate MatterHumidity

Stichwörter der Autor:innen

IoTgas exposureindoor outdoor localizationparticulate matter (PM)safetysensor nodesmart personal protective equipment (PPE)wearable

Substanzen

Particulate Matter

Autor:innen und Institutionen

  • ENEA, 80055 Portici, Italy.
  • STMicroelectronics, 95121 Catania, Italy.
  • STMicroelectronics, 80022 Arzano, Italy.

ORCID-Profile: Fabrizio Formisano, Ettore Massera, Girolamo Di Francia

Förderung

  • Ministry of Economic Development

Zitieren

APA

Formisano, F., Dellutri, M., Massera, E., Giudice, A. D., Barretta, L., & Di Francia, G. (2024). Wearable Sensor Node for Safety Improvement in Workplaces: Technology Assessment in a Simulated Environment. Sensors, 24(15), 4993. https://doi.org/10.3390/s24154993

Vancouver

Formisano F, Dellutri M, Massera E, Giudice AD, Barretta L, Di Francia G. Wearable Sensor Node for Safety Improvement in Workplaces: Technology Assessment in a Simulated Environment. Sensors. 2024;24(15):4993. doi:10.3390/s24154993

BibTeX
@article{Formisano2024,
  author = {Formisano, Fabrizio and Dellutri, Michele and Massera, Ettore and Giudice, Antonio Del and Barretta, Luigi and Di Francia, Girolamo},
  title = {Wearable Sensor Node for Safety Improvement in Workplaces: Technology Assessment in a Simulated Environment},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {15},
  pages = {4993},
  doi = {10.3390/s24154993}
}
Kostenlos starten →