EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultrasonic Non-Destructive Testing and Evaluation of Stainless-Steel Resistance Spot Welding Based on Spiral C-Scan Technique

Liang Yang, Rongyan Chuai, Guixi Cai, Dan Xue, Jingming Li, Kunlin Liu, Chang Liu

Sensors · 23.07.2024 · 24 (15) · 4771

DOI: 10.3390/s24154771 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 23.07.2024. Verfasst von Liang Yang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Information Science and Engineering, Shenyang University of Technology, Shenyang 110870, China. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Basic scientific research project by the Liaoning Provincial Department, basic scientific research project by the Liaoning Provincial Department of Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to achieve the non-destructive testing and quality evaluation of stainless-steel resistance spot welding (RSW) joints, a portable ultrasonic spiral C-scan testing instrument was developed based on the principle of ultrasonic pulse reflection. A mathematical model for the quality evaluation of RSW joints was established, and the centroid of the ultrasonic C-scan image in the nugget zone of the RSW was determined based on the principle of static moment. The longest and shortest axes passing through the centroid in the image were extracted, and the ratio of the longest axis to the shortest axis (RLS) factor and the average of axis (AOA) factor were calculated, respectively, to evaluate the quality of the joint. To study the effectiveness of the detection results, tensile tests, and stereo analysis were conducted on the solder joints after sampling. The results indicate that this detection method can realize online detection and significantly improve the detection efficiency; the detection value of internal defect size is close to the true value with an error of 0.1 mm; the combination of RLS and AOA factors can be used to evaluate the mechanical properties of RSW joints. This technology can be used to solve the NDT, evaluate problems of RSW joints, and realize engineering applications.

Schlagwörter

Stichwörter der Autor:innen

mechanical propertynon-destructive evaluationresistance spot weldspiral C-scanultrasonic testing

Autor:innen und Institutionen

  • School of Information Science and Engineering, Shenyang University of Technology, Shenyang 110870, China.
  • Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China.
  • School of Materials Science and Engineering, University of Science and Technology of China, Shenyang 110016, China.

Förderung

  • National Natural Science Foundation of China
  • Basic scientific research project by the Liaoning Provincial Department
  • basic scientific research project by the Liaoning Provincial Department of Education

Zitieren

APA

Yang, L., Chuai, R., Cai, G., Xue, D., Li, J., Liu, K., & Liu, C. (2024). Ultrasonic Non-Destructive Testing and Evaluation of Stainless-Steel Resistance Spot Welding Based on Spiral C-Scan Technique. Sensors, 24(15), 4771. https://doi.org/10.3390/s24154771

Vancouver

Yang L, Chuai R, Cai G, Xue D, Li J, Liu K, et al. Ultrasonic Non-Destructive Testing and Evaluation of Stainless-Steel Resistance Spot Welding Based on Spiral C-Scan Technique. Sensors. 2024;24(15):4771. doi:10.3390/s24154771

BibTeX
@article{Yang2024,
  author = {Yang, Liang and Chuai, Rongyan and Cai, Guixi and Xue, Dan and Li, Jingming and Liu, Kunlin and Liu, Chang},
  title = {Ultrasonic Non-Destructive Testing and Evaluation of Stainless-Steel Resistance Spot Welding Based on Spiral C-Scan Technique},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {15},
  pages = {4771},
  doi = {10.3390/s24154771}
}
Kostenlos starten →