Welding Seam Tracking and Inspection Robot Based on Improved YOLOv8s-Seg Model
Sensors · 19.07.2024 · 24 (14) · 4690
DOI: 10.3390/s24144690 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 19.07.2024. Verfasst von Minghu Zhao und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Science, Xi'an Polytechnic University, Xi'an 710048, China. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 2024 Graduate Innovation Fund Project of Xi'an Polytechnic University, Qin Chuangyuan Scientists + Engineers Team Project of the Shaanxi Science and Technology Department, 2024 Graduate Innovation Fund Project of Xi’an Polytechnic University.
Abstract (Originalsprache)
A weld is the main connection form of special equipment, and a weld is also the most vulnerable part of special equipment. Therefore, an effective detection of a weld is of great significance to improve the safety of special equipment. The traditional inspection method is not only time-consuming and labor-intensive, but also expensive. The welding seam tracking and inspection robot can greatly improve the inspection efficiency and save on inspection costs. Therefore, this paper proposes a welding seam tracking and inspection robot based on YOLOv8s-seg. Firstly, the MobileNetV3 lightweight backbone network is used to replace the backbone part of YOLOv8s-seg to reduce the model parameters. Secondly, we reconstruct C2f and prune the number of output channels of the new building module C2fGhost. Finally, in order to make up for the precision loss caused by the lightweight model, we add an EMA attention mechanism after each detection layer in the neck part of the model. The experimental results show that the accuracy of weld recognition reaches 97.8%, and the model size is only 4.88 MB. The improved model is embedded in Jetson nano, a robot control system for seam tracking and detection, and TensorRT is used to accelerate the reasoning of the model. The total reasoning time from image segmentation to path fitting is only 54 ms, which meets the real-time requirements of the robot for seam tracking and detection, and realizes the path planning of the robot for inspecting the seam efficiently and accurately.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Science, Xi'an Polytechnic University, Xi'an 710048, China.
- School of Electronic Information, Xi'an Polytechnic University, Xi'an 710048, China.
- School of Mechanical and Electrical Engineering, Xi'an Polytechnic University, Xi'an 710048, China.
Förderung
- 2024 Graduate Innovation Fund Project of Xi'an Polytechnic University
- Qin Chuangyuan Scientists + Engineers Team Project of the Shaanxi Science and Technology Department
- 2024 Graduate Innovation Fund Project of Xi’an Polytechnic University
Zitieren
APA
Zhao, M., Liu, X., Wang, K., Liu, Z., Dong, Q., Wang, P., & Su, Y. (2024). Welding Seam Tracking and Inspection Robot Based on Improved YOLOv8s-Seg Model. Sensors, 24(14), 4690. https://doi.org/10.3390/s24144690
Vancouver
Zhao M, Liu X, Wang K, Liu Z, Dong Q, Wang P, et al. Welding Seam Tracking and Inspection Robot Based on Improved YOLOv8s-Seg Model. Sensors. 2024;24(14):4690. doi:10.3390/s24144690
BibTeX
@article{Zhao2024,
author = {Zhao, Minghu and Liu, Xinru and Wang, Kaihang and Liu, Zishen and Dong, Qi and Wang, Pengfei and Su, Yaoheng},
title = {Welding Seam Tracking and Inspection Robot Based on Improved YOLOv8s-Seg Model},
journal = {Sensors},
year = {2024},
volume = {24},
number = {14},
pages = {4690},
doi = {10.3390/s24144690}
}
EUVIMED