EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Pulsed-Mode Magnetic Field Measurements with a Single Stretched Wire System

Joseph Vella Wallbank iD, Marco Buzio iD, Alessandro Parrella iD, Carlo Petrone iD, Nicholas Sammut iD

Sensors · 16.07.2024 · 24 (14) · 4610

DOI: 10.3390/s24144610 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 16.07.2024. Verfasst von Joseph Vella Wallbank und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Microelectronics and Nanoelectronics, Universita ta' Malta, MSD 2080 Msida, Malta. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In synchrotrons, accurate knowledge of the magnetic field generated by bending dipole magnets is essential to ensure beam stability. Measurement campaigns are necessary to characterize the field. The choice of the measurement method for such campaigns is determined by the combination of magnet dimensions and operating conditions and typically require a trade-off between accuracy and versatility. The single stretched wire (SSW) is a well-known, polyvalent method to measure the integral field of magnets having a wide range of geometries. It, however, requires steady-state excitation. This work presents a novel implementation of this method called pulsed SSW, which allows the system to measure rapidly time-varying magnetic fields, as is often needed, to save power or gain beam time. We first introduce the measurement principle of the pulsed SSW, followed by a combined strategy to calculate the absolute magnetic field by incorporating the classic DC SSW method. Using a bending magnet from the Proton Synchrotron Booster located at the European Organization for Nuclear Research as a case study, we validate the pulsed SSW method and compare its dynamic measurement capabilities to a fixed induction coil, showing thereby how the coil calibration must be adjusted according to the field level. Finally, we assess the method’s measurement accuracy using the standard SSW as a reference and present an analysis of the primary noise contributors.

Schlagwörter

Stichwörter der Autor:innen

bending magnetinduction coil calibrationmagnetic field measurementsparticle acceleratorssingle stretched wire

Autor:innen und Institutionen

  • Department of Microelectronics and Nanoelectronics, Universita ta' Malta, MSD 2080 Msida, Malta.
  • Technology Department, CERN-European Organization for Nuclear Research, 1217 Geneva, Switzerland.

ORCID-Profile: Joseph Vella Wallbank, Marco Buzio, Alessandro Parrella, Carlo Petrone, Nicholas Sammut

Zitieren

APA

Vella Wallbank, J., Buzio, M., Parrella, A., Petrone, C., & Sammut, N. (2024). Pulsed-Mode Magnetic Field Measurements with a Single Stretched Wire System. Sensors, 24(14), 4610. https://doi.org/10.3390/s24144610

Vancouver

Vella Wallbank J, Buzio M, Parrella A, Petrone C, Sammut N. Pulsed-Mode Magnetic Field Measurements with a Single Stretched Wire System. Sensors. 2024;24(14):4610. doi:10.3390/s24144610

BibTeX
@article{VellaWallbank2024,
  author = {Vella Wallbank, Joseph and Buzio, Marco and Parrella, Alessandro and Petrone, Carlo and Sammut, Nicholas},
  title = {Pulsed-Mode Magnetic Field Measurements with a Single Stretched Wire System},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {14},
  pages = {4610},
  doi = {10.3390/s24144610}
}
Kostenlos starten →