EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Natural Frequency Transmissibility for Detection of Cracks in Horizontal Axis Wind Turbine Blades

Rachel Henderson, Fae Azhari, Anthony Sinclair iD

Sensors · 10.07.2024 · 24 (14) · 4456

DOI: 10.3390/s24144456 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 10.07.2024. Verfasst von Rachel Henderson und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, ON M5S 3G8, Canada. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council, Canadian Natural Sciences and Engineering Research Council (NSERC), The University of Toronto.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Defects on horizontal axis wind turbine blades are difficult to identify and monitor with conventional forms of non-destructive examination due to the blade’s large size and limited accessibility during continuous operation. This article examines both strain and acceleration transmissibility as methods of continuous damage detection on wind turbine blades. A scaled 117 cm offshore wind turbine blade was first designed, 3D printed, and modelled numerically in ANSYS. Transverse cracks were deliberately introduced to the blade at 10 cm intervals along its leading edge. Subsequent changes in the transmissibility, relative to an undamaged baseline model, were measured using different variable combinations at the blade’s first three natural frequencies. Experimental results indicated that strain transmissibility was able to locate a 1.0 cm defect at a range of 70–110 cm from the blade hub using the amplitudes of the first natural frequency of vibration. The numerical model was able to simulate the strain experimental results and was determined to be valid for future defect characterization. Acceleration transmissibility was unable to experimentally identify defects sized at 1.0 cm and below but was able to identify 1.0 cm sized defects numerically. It was concluded that transmissibility is viable for continuous damage detection on blades but that further research into other defect types and locations is required prior to conducting full-scale testing.

Schlagwörter

Stichwörter der Autor:innen

3D printingaccelerationcondition monitoringhorizontal axis wind turbinenatural frequencynon-destructive examinationstraintransmissibilityvibration

Autor:innen und Institutionen

  • Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, ON M5S 3G8, Canada.

ORCID-Profile: Anthony Sinclair

Förderung

  • Natural Sciences and Engineering Research Council
  • Canadian Natural Sciences and Engineering Research Council (NSERC)
  • The University of Toronto

Zitieren

APA

Henderson, R., Azhari, F., & Sinclair, A. (2024). Natural Frequency Transmissibility for Detection of Cracks in Horizontal Axis Wind Turbine Blades. Sensors, 24(14), 4456. https://doi.org/10.3390/s24144456

Vancouver

Henderson R, Azhari F, Sinclair A. Natural Frequency Transmissibility for Detection of Cracks in Horizontal Axis Wind Turbine Blades. Sensors. 2024;24(14):4456. doi:10.3390/s24144456

BibTeX
@article{Henderson2024,
  author = {Henderson, Rachel and Azhari, Fae and Sinclair, Anthony},
  title = {Natural Frequency Transmissibility for Detection of Cracks in Horizontal Axis Wind Turbine Blades},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {14},
  pages = {4456},
  doi = {10.3390/s24144456}
}
Kostenlos starten →