Design, Development and Application of a Modular Electromagnetic Induction (EMI) Sensor for Near-Surface Geophysical Surveys
Sensors · 26.06.2024 · 24 (13) · 4159
DOI: 10.3390/s24134159 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 26.06.2024. Verfasst von Luzian Wolf und 1 weiteren Autor:innen. Beteiligte Einrichtung: Research Unit Geophysics, Department of Geodesy and Geoinformation, TU Wien, 1040 Vienna, Austria. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Low-frequency electromagnetic induction (EMI) is a non-invasive geophysical method that is based on the induction of electromagnetic (EM) waves into the subsurface to quantify changes in electrical conductivity. In this study, we present an open (design details and software are accessible) and modular system for the collection of EMI data. The instrument proposed allows for the separations between the transmitter to be adjusted and up to four receiving antennas as well as the acquisition frequency (in the range between 3 and 50 kHz) to permit measurements with variable depth of investigation. The sensor provides access to raw data and the software described in this study allows control of the signal processing chain. The design specifications permit apparent conductivity measurements in the range of between 1 mS/m and 1000 mS/m, with a resolution of 1.0 mS/m and with a sampling rate of up to 10 samples per second. The sensor allows for a synchronous acquisition of a time stamp and a location stamp for each data sample. The sensor has a mass of less than 5 kg, is portable and suitable for one-person operation, provides 4 h of operation time on one battery charge, and provides sufficient rigidity for practical field operations.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Research Unit Geophysics, Department of Geodesy and Geoinformation, TU Wien, 1040 Vienna, Austria.
ORCID-Profile: Adrian Flores Orozco
Zitieren
APA
Wolf, L., & Flores Orozco, A. (2024). Design, Development and Application of a Modular Electromagnetic Induction (EMI) Sensor for Near-Surface Geophysical Surveys. Sensors, 24(13), 4159. https://doi.org/10.3390/s24134159
Vancouver
Wolf L, Flores Orozco A. Design, Development and Application of a Modular Electromagnetic Induction (EMI) Sensor for Near-Surface Geophysical Surveys. Sensors. 2024;24(13):4159. doi:10.3390/s24134159
BibTeX
@article{Wolf2024,
author = {Wolf, Luzian and Flores Orozco, Adrian},
title = {Design, Development and Application of a Modular Electromagnetic Induction (EMI) Sensor for Near-Surface Geophysical Surveys},
journal = {Sensors},
year = {2024},
volume = {24},
number = {13},
pages = {4159},
doi = {10.3390/s24134159}
}
EUVIMED