EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Virtual Testing Framework for Real-Time Validation of Automotive Software Systems Based on Hardware in the Loop and Fault Injection

Mohammad Abboush iD, Christoph Knieke iD, Andreas Rausch iD

Sensors · 08.06.2024 · 24 (12) · 3733

DOI: 10.3390/s24123733 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 08.06.2024. Verfasst von Mohammad Abboush und 2 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Software and Systems Engineering, Technical University of Clausthal, 38678 Clausthal-Zellerfeld, Germany. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Access Publishing Fund of Clausthal University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To validate safety-related automotive software systems, experimental tests are conducted at different stages of the V-model, which are referred as “X-in-the-loop (XIL) methods”. However, these methods have significant drawbacks in terms of cost, time, effort and effectiveness. In this study, based on hardware-in-the-loop (HIL) simulation and real-time fault injection (FI), a novel testing framework has been developed to validate system performance under critical abnormal situations during the development process. The developed framework provides an approach for the real-time analysis of system behavior under single and simultaneous sensor/actuator-related faults during virtual test drives without modeling effort for fault mode simulations. Unlike traditional methods, the faults are injected programmatically and the system architecture is ensured without modification to meet the real-time constraints. Moreover, a virtual environment is modeled with various environmental conditions, such as weather, traffic and roads. The validation results demonstrate the effectiveness of the proposed framework in a variety of driving scenarios. The evaluation results demonstrate that the system behavior via HIL simulation has a high accuracy compared to the non-real-time simulation method with an average relative error of 2.52. The comparative study with the state-of-the-art methods indicates that the proposed approach exhibits superior accuracy and capability. This, in turn, provides a safe, reliable and realistic environment for the real-time validation of complex automotive systems at a low cost, with minimal time and effort.

Schlagwörter

Stichwörter der Autor:innen

automotive software systemsfault injectionhardware in the loop (HIL)model-based developmentreal-time systemssafety validationsystem integration and testvirtual test

Autor:innen und Institutionen

  • Institute for Software and Systems Engineering, Technical University of Clausthal, 38678 Clausthal-Zellerfeld, Germany.

ORCID-Profile: Mohammad Abboush, Christoph Knieke, Andreas Rausch

Förderung

  • Open Access Publishing Fund of Clausthal University of Technology

Zitieren

APA

Abboush, M., Knieke, C., & Rausch, A. (2024). A Virtual Testing Framework for Real-Time Validation of Automotive Software Systems Based on Hardware in the Loop and Fault Injection. Sensors, 24(12), 3733. https://doi.org/10.3390/s24123733

Vancouver

Abboush M, Knieke C, Rausch A. A Virtual Testing Framework for Real-Time Validation of Automotive Software Systems Based on Hardware in the Loop and Fault Injection. Sensors. 2024;24(12):3733. doi:10.3390/s24123733

BibTeX
@article{Abboush2024,
  author = {Abboush, Mohammad and Knieke, Christoph and Rausch, Andreas},
  title = {A Virtual Testing Framework for Real-Time Validation of Automotive Software Systems Based on Hardware in the Loop and Fault Injection},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {12},
  pages = {3733},
  doi = {10.3390/s24123733}
}
Kostenlos starten →