EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quality Analysis of 3D Point Cloud Using Low-Cost Spherical Camera for Underpass Mapping

Sina Rezaei, Angelina Maier, Hossein Arefi iD

Sensors · 30.05.2024 · 24 (11) · 3534

DOI: 10.3390/s24113534 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 30.05.2024. Verfasst von Sina Rezaei und 2 weiteren Autor:innen. Beteiligte Einrichtung: i3mainz, Institute for Spatial Information and Surveying Technology, School of Technology, Mainz University of Applied Sciences, D-55118 Mainz, Germa…. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Mainz University of Applied Sciences, President’s Innovation Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional point cloud evaluation is used in photogrammetry to validate and assess the accuracy of data acquisition in order to generate various three-dimensional products. This paper determines the optimal accuracy and correctness of a 3D point cloud produced by a low-cost spherical camera in comparison to the 3D point cloud produced by laser scanner. The fisheye images were captured from a chessboard using a spherical camera, which was calibrated using the commercial Agisoft Metashape software (version 2.1). For this purpose, the results of different calibration methods are compared. In order to achieve data acquisition, multiple images were captured from the inside area of our case study structure (an underpass in Wiesbaden, Germany) in different configurations with the aim of optimal network design for camera location and orientation. The relative orientation was generated from multiple images obtained by removing the point cloud noise. For assessment purposes, the same scene was captured with a laser scanner to generate a metric comparison between the correspondence point cloud and the spherical one. The geometric features of both point clouds were analyzed for a complete geometric quality assessment. In conclusion, this study highlights the promising capabilities of low-cost spherical cameras for capturing and generating high-quality 3D point clouds by conducting a thorough analysis of the geometric features and accuracy assessments of the absolute and relative orientations of the generated clouds. This research demonstrated the applicability of spherical camera-based photogrammetry to challenging structures, such as underpasses with limited space for data acquisition, and achieved a 0.34 RMS re-projection error in the relative orientation step and a ground control point accuracy of nearly 1 mm. Compared to the laser scanner point cloud, the spherical point cloud reached an average distance of 0.05 m and acceptable geometric consistency.

Schlagwörter

Stichwörter der Autor:innen

3D point cloudassessmentdata acquisitiongeometric featuresrelative orientationspherical camera

Autor:innen und Institutionen

  • i3mainz, Institute for Spatial Information and Surveying Technology, School of Technology, Mainz University of Applied Sciences, D-55118 Mainz, Germany.

ORCID-Profile: Hossein Arefi

Förderung

  • Mainz University of Applied Sciences, President’s Innovation Fund

Zitieren

APA

Rezaei, S., Maier, A., & Arefi, H. (2024). Quality Analysis of 3D Point Cloud Using Low-Cost Spherical Camera for Underpass Mapping. Sensors, 24(11), 3534. https://doi.org/10.3390/s24113534

Vancouver

Rezaei S, Maier A, Arefi H. Quality Analysis of 3D Point Cloud Using Low-Cost Spherical Camera for Underpass Mapping. Sensors. 2024;24(11):3534. doi:10.3390/s24113534

BibTeX
@article{Rezaei2024,
  author = {Rezaei, Sina and Maier, Angelina and Arefi, Hossein},
  title = {Quality Analysis of 3D Point Cloud Using Low-Cost Spherical Camera for Underpass Mapping},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {11},
  pages = {3534},
  doi = {10.3390/s24113534}
}
Kostenlos starten →