EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Fatigue, Recovery, and Environmental Factors on the Body Stability of Construction Workers

Daehwi Jo, Hyunsoo Kim iD

Sensors · 28.05.2024 · 24 (11) · 3469

DOI: 10.3390/s24113469 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 28.05.2024. Verfasst von Daehwi Jo und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Architectural Engineering, Dankook University, 152 Jukjeon-ro, Suji-gu, Yongin-si 16890, Gyeonggi-do, Republic of Korea. Hauptthemen laut MEDLINE: Construction Industry, Fatigue. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the construction industry, falls, slips, and trips (FST) account for 42.3% of all accidents. The primary cause of FST incidents is directly related to the deterioration of workers’ body stability. To prevent FST-related accidents, it is crucial to understand the interaction between physical fatigue and body stability in construction workers. Therefore, this study investigates the impact of fatigue on body stability in various construction site environments using Dynamic Time Warping (DTW) analysis. We conducted experiments reflecting six different fatigue levels and four environmental conditions. The analysis process involves comparing changes in DTW values derived from acceleration data obtained through wearable sensors across varying fatigue levels and construction environments. The results reveal the following changes in DTW values across different environments and fatigue levels: for non-obstacle, obstacle, water, and oil conditions, DTW values tend to increase as fatigue levels rise. In our experiments, we observed a significant decrease in body stability against external environments starting from fatigue Levels 3 or 4 (30% and 40% of the maximum failure point). In the non-obstacle condition, the DTW values were 9.4 at Level 0, 12.8 at Level 3, and 23.1 at Level 5. In contrast, for the oil condition, which exhibited the highest DTW values, the values were 10.5 at Level 0, 19.1 at Level 3, and 34.5 at Level 5. These experimental results confirm that the body stability of construction workers is influenced by both fatigue levels and external environmental conditions. Further analysis of recovery time, defined as the time it takes for body stability to return to its original level, revealed an increasing trend in recovery time as fatigue levels increased. This study quantitatively demonstrates through wearable sensor data that, as fatigue levels increase, workers experience decreased body stability and longer recovery times. The findings of this study can inform individual worker fatigue management in the future.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Construction IndustryFatigueHumansAdultMalePostural BalanceWearable Electronic DevicesAccidental Falls

Stichwörter der Autor:innen

Dynamic Time Warping (DTW)FSTs (fallsInertial Measurement Unit (IMU)and trips)body stabilityfatigueslips

Autor:innen und Institutionen

  • Department of Architectural Engineering, Dankook University, 152 Jukjeon-ro, Suji-gu, Yongin-si 16890, Gyeonggi-do, Republic of Korea.

ORCID-Profile: Hyunsoo Kim

Zitieren

APA

Jo, D., & Kim, H. (2024). The Influence of Fatigue, Recovery, and Environmental Factors on the Body Stability of Construction Workers. Sensors, 24(11), 3469. https://doi.org/10.3390/s24113469

Vancouver

Jo D, Kim H. The Influence of Fatigue, Recovery, and Environmental Factors on the Body Stability of Construction Workers. Sensors. 2024;24(11):3469. doi:10.3390/s24113469

BibTeX
@article{Jo2024,
  author = {Jo, Daehwi and Kim, Hyunsoo},
  title = {The Influence of Fatigue, Recovery, and Environmental Factors on the Body Stability of Construction Workers},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {11},
  pages = {3469},
  doi = {10.3390/s24113469}
}
Kostenlos starten →