EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Reliability Assessment Method for Complex Systems Based on Non-Homogeneous Markov Processes

Xiaolei Pan iD, Hongxiao Chen iD, Ao Shen, Dongdong Zhao, Xiaoyan Su

Sensors · 27.05.2024 · 24 (11) · 3446

DOI: 10.3390/s24113446 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 27.05.2024. Verfasst von Xiaolei Pan und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Automation Engineering, Shanghai University of Electric Power, Shanghai 200090, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Shanghai Sailing Program, Shanghai Sailing Program, Shanghai Rising-Star Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Markov method is a common reliability assessment method. It is often used to describe the dynamic characteristics of a system, such as its repairability, fault sequence and multiple degradation states. However, the “curse of dimensionality”, which refers to the exponential growth of the system state space with the increase in system complexity, presents a challenge to reliability assessments for complex systems based on the Markov method. In response to this challenge, a novel reliability assessment method for complex systems based on non-homogeneous Markov processes is proposed. This method entails the decomposition of a complex system into multilevel subsystems, each with a relatively small state space, in accordance with the system function. The homogeneous Markov model or the non-homogeneous Markov model is established for each subsystem/system from bottom to top. In order to utilize the outcomes of the lower-level subsystem models as inputs to the upper-level subsystem model, an algorithm is proposed for converting the unavailability curve of a subsystem into its corresponding 2×2 dynamic state transition probability matrix (STPM). The STPM is then employed as an input to the upper-level system’s non-homogeneous Markov model. A case study is presented using the reliability assessment of the Reactor Protection System (RPS) based on the proposed method, which is then compared with the models based on the other two contrast methods. This comparison verifies the effectiveness and accuracy of the proposed method.

Schlagwörter

Stichwörter der Autor:innen

complex systemscurse of dimensionalitynon-homogeneous Markov processesreliability assessment

Autor:innen und Institutionen

  • College of Automation Engineering, Shanghai University of Electric Power, Shanghai 200090, China.
  • Shanghai Key Laboratory of Power Station Automation Technology, Shanghai 200090, China.

ORCID-Profile: Xiaolei Pan, Hongxiao Chen

Förderung

  • the Shanghai Sailing Program
  • Shanghai Sailing Program
  • Shanghai Rising-Star Program

Zitieren

APA

Pan, X., Chen, H., Shen, A., Zhao, D., & Su, X. (2024). A Reliability Assessment Method for Complex Systems Based on Non-Homogeneous Markov Processes. Sensors, 24(11), 3446. https://doi.org/10.3390/s24113446

Vancouver

Pan X, Chen H, Shen A, Zhao D, Su X. A Reliability Assessment Method for Complex Systems Based on Non-Homogeneous Markov Processes. Sensors. 2024;24(11):3446. doi:10.3390/s24113446

BibTeX
@article{Pan2024,
  author = {Pan, Xiaolei and Chen, Hongxiao and Shen, Ao and Zhao, Dongdong and Su, Xiaoyan},
  title = {A Reliability Assessment Method for Complex Systems Based on Non-Homogeneous Markov Processes},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {11},
  pages = {3446},
  doi = {10.3390/s24113446}
}
Kostenlos starten →