EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reducing Tyre Wear Emissions of Automated Articulated Vehicles through Trajectory Planning

Georgios Papaioannou iD, Vallan Maroof, Jenny Jerrelind iD, Lars Drugge iD

Sensors · 16.05.2024 · 24 (10) · 3179

DOI: 10.3390/s24103179 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 16.05.2024. Verfasst von Georgios Papaioannou und 3 weiteren Autor:innen. Beteiligte Einrichtung: Cognitive Robotics, TU Delft, 2628 CD Delft, The Netherlands. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: TRENOP, VINNOVA.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Effective emission control technologies and eco-friendly propulsion systems have been developed to decrease exhaust particle emissions. However, more work must be conducted on non-exhaust traffic-related sources such as tyre wear. The advent of automated vehicles (AVs) enables researchers and automotive manufacturers to consider ways to further decrease tyre wear, as vehicles will be controlled by the system rather than by the driver. In this direction, this work presents the formulation of an optimal control problem for the trajectory optimisation of automated articulated vehicles for tyre wear minimisation. The optimum velocity profile is sought for a predefined road path from a specific starting point to a final one to minimise tyre wear in fixed time cases. Specific boundaries and constraints are applied to the problem to ensure the vehicle’s stability and the feasibility of the solution. According to the results, a small increase in the journey time leads to a significant decrease in the mass loss due to tyre wear. The employment of articulated vehicles with low powertrain capabilities leads to greater tyre wear, while excessive increases in powertrain capabilities are not required. The conclusions pave the way for AV researchers and manufacturers to consider tyre wear in their control modules and come closer to the zero-emission goal.

Schlagwörter

Stichwörter der Autor:innen

articulated vehiclesenergy-efficiencyoptimal controltrajectory planningtyre wear

Autor:innen und Institutionen

  • Cognitive Robotics, TU Delft, 2628 CD Delft, The Netherlands.
  • The Centre for ECO2 Vehicle Design, KTH Royal Institute of Technology, 100 44 Stockholm, Sweden.
  • Engineering Mechanics, KTH Royal Institute of Technology, 100 44 Stockholm, Sweden.

ORCID-Profile: Georgios Papaioannou, Jenny Jerrelind, Lars Drugge

Förderung

  • TRENOP
  • VINNOVA

Zitieren

APA

Papaioannou, G., Maroof, V., Jerrelind, J., & Drugge, L. (2024). Reducing Tyre Wear Emissions of Automated Articulated Vehicles through Trajectory Planning. Sensors, 24(10), 3179. https://doi.org/10.3390/s24103179

Vancouver

Papaioannou G, Maroof V, Jerrelind J, Drugge L. Reducing Tyre Wear Emissions of Automated Articulated Vehicles through Trajectory Planning. Sensors. 2024;24(10):3179. doi:10.3390/s24103179

BibTeX
@article{Papaioannou2024,
  author = {Papaioannou, Georgios and Maroof, Vallan and Jerrelind, Jenny and Drugge, Lars},
  title = {Reducing Tyre Wear Emissions of Automated Articulated Vehicles through Trajectory Planning},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {10},
  pages = {3179},
  doi = {10.3390/s24103179}
}
Kostenlos starten →