EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Sensor Device for Traceable Monitoring of Indoor Environmental Quality

Virginia Isabella Fissore, Giuseppina Arcamone iD, Arianna Astolfi iD, Alberto Barbaro iD, Alessio Carullo, Pietro Chiavassa iD, Marina Clerico iD, Stefano Fantucci iD, Franco Fiori, Davide Gallione, Edoardo Giusto iD, Alice Lorenzati iD und 9 weitere

Sensors · 01.05.2024 · 24 (9) · 2893

DOI: 10.3390/s24092893 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 01.05.2024. Verfasst von Virginia Isabella Fissore und 20 weiteren Autor:innen. Beteiligte Einrichtung: Department of Energy, Politecnico di Torino, 10129 Turin, Italy. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Italgas Reti S.p.A., national action program in the framework of the REACT EU Initiative, Politecnico di Torino, CALOS Department.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Indoor Environmental Quality (IEQ) combines thermal, visual, acoustic, and air-quality conditions in indoor environments and affects occupants’ health, well-being, and comfort. Performing continuous monitoring to assess IEQ is increasingly proving to be important, also due to the large amount of time that people spend in closed spaces. In the present study, the design, development, and metrological characterization of a low-cost multi-sensor device is presented. The device is part of a wider system, hereafter referred to as PROMET&O (PROactive Monitoring for indoor EnvironmenTal quality & cOmfort), that also includes a questionnaire for the collection of occupants’ feedback on comfort perception and a dashboard to show end users all monitored data. The PROMET&O multi-sensor monitors the quality conditions of indoor environments thanks to a set of low-cost sensors that measure air temperature, relative humidity, illuminance, sound pressure level, carbon monoxide, carbon dioxide, nitrogen dioxide, particulate matter, volatile organic compounds, and formaldehyde. The device architecture is described, and the design criteria related to measurement requirements are highlighted. Particular attention is paid to the calibration of the device to ensure the metrological traceability of the measurements. Calibration procedures, based on the comparison to reference standards and following commonly employed or ad hoc developed technical procedures, were defined and applied to the bare sensors of air temperature and relative humidity, carbon dioxide, illuminance, sound pressure level, particulate matter, and formaldehyde. The next calibration phase in the laboratory will be aimed at analyzing the mutual influences of the assembled multi-sensor hardware components and refining the calibration functions.

Schlagwörter

Stichwörter der Autor:innen

bare sensorsindoor environmental qualitymetrological characterizationmulti-sensoruncertainty

Autor:innen und Institutionen

  • Department of Energy, Politecnico di Torino, 10129 Turin, Italy.
  • Department of Electronics and Telecommunication, Politecnico di Torino, 10129 Turin, Italy.
  • Department of Control and Computer Engineering, Politecnico di Torino, 10129 Turin, Italy.
  • Department of Environment, Land and Infrastructure Engineering, Politecnico di Torino, 10129 Turin, Italy.
  • Department of Electrical and Information Technology Engineering, Università di Napoli Federico II, 80138 Naples, Italy.
  • LAMSA-Department of Architecture and Design, Politecnico di Torino, 10129 Turin, Italy.

ORCID-Profile: Giuseppina Arcamone, Arianna Astolfi, Alberto Barbaro, Pietro Chiavassa, Marina Clerico, Stefano Fantucci, Edoardo Giusto, Alice Lorenzati, Anna Pellegrino, Giuseppina Emma Puglisi, Gustavo Ramirez-Espinosa, Erica Raviola, Antonio Servetti, Louena Shtrepi

Förderung

  • Italgas Reti S.p.A.
  • national action program in the framework of the REACT EU Initiative
  • Politecnico di Torino, CALOS Department
  • companies Italgas Reti S.p.A. and C2R Energy Consulting S.r.l

Zitieren

APA

Fissore, V. I., Arcamone, G., Astolfi, A., Barbaro, A., Carullo, A., Chiavassa, P., Clerico, M., Fantucci, S., Fiori, F., Gallione, D., Giusto, E., Lorenzati, A., Mastromatteo, N., Montrucchio, B., Pellegrino, A., Piccablotto, G., Puglisi, G. E., Ramirez-Espinosa, G., Raviola, E., …, & Shtrepi, L. (2024). Multi-Sensor Device for Traceable Monitoring of Indoor Environmental Quality. Sensors, 24(9), 2893. https://doi.org/10.3390/s24092893

Vancouver

Fissore VI, Arcamone G, Astolfi A, Barbaro A, Carullo A, Chiavassa P, et al. Multi-Sensor Device for Traceable Monitoring of Indoor Environmental Quality. Sensors. 2024;24(9):2893. doi:10.3390/s24092893

BibTeX
@article{Fissore2024,
  author = {Fissore, Virginia Isabella and Arcamone, Giuseppina and Astolfi, Arianna and Barbaro, Alberto and Carullo, Alessio and Chiavassa, Pietro and Clerico, Marina and Fantucci, Stefano and Fiori, Franco and Gallione, Davide and Giusto, Edoardo and Lorenzati, Alice and Mastromatteo, Nicole and Montrucchio, Bartolomeo and Pellegrino, Anna and Piccablotto, Gabriele and Puglisi, Giuseppina Emma and Ramirez-Espinosa, Gustavo and Raviola, Erica and Servetti, Antonio and Shtrepi, Louena},
  title = {Multi-Sensor Device for Traceable Monitoring of Indoor Environmental Quality},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {9},
  pages = {2893},
  doi = {10.3390/s24092893}
}
Kostenlos starten →