In Situ Non-Destructive Stiffness Assessment of Fiber Reinforced Composite Plates Using Ultrasonic Guided Waves
Sensors · 25.04.2024 · 24 (9) · 2747
DOI: 10.3390/s24092747 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 25.04.2024. Verfasst von Maarten Adams und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Maritime and Transport Technology, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Materiel and IT Command of The Netherlands Ministry of Defence, TU Delft.
Abstract (Originalsprache)
The multimodal and dispersive character of ultrasonic guided waves (UGW) offers the potential for non-destructive evaluation of fiber-reinforced composite (FRC) materials. In this study, a methodology for in situ stiffness assessment of FRCs using UGWs is introduced. The proposed methodology involves a comparison between measured wave speeds of the fundamental symmetric and antisymmetric guided wave modes with a pre-established dataset of UGW speeds and translation of them to corresponding stiffness properties, i.e., ABD-components, in an inverse manner. The dispersion relations of guided waves have been calculated using the semi-analytical finite element method. First, the performance of the proposed methodology has been assessed numerically. It has been demonstrated that each of the independent ABD-components of the considered laminate can be approximated with an error lower than 10.4% compared to its actual value. The extensional and bending stiffness properties can be approximated within an average error of 3.6% and 9.0%, respectively. Secondly, the performance of the proposed methodology has been assessed experimentally. This experimental assessment has been performed on a glass fiber-reinforced composite plate and the results were compared to mechanical tensile and four-point bending tests on coupons cut from the plate. Larger differences between the estimated ABD-components according to UGW and mechanical testing were observed. These differences were partly attributed to the variation in material properties across the test plate and the averaging of properties over the measurement area.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Maritime and Transport Technology, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands.
- Department of Aerospace Structures and Materials, Delft University of Technology, Kluyverweg 1, 2629 HS Delft, The Netherlands.
- Materiel and IT Command, The Netherlands Ministry of Defence, Kromhout Kazerne, Herculeslaan 1, 3584 AB Utrecht, The Netherlands.
ORCID-Profile: Arnaud Huijer, Lotfollah Pahlavan
Förderung
- Materiel and IT Command of The Netherlands Ministry of Defence
- TU Delft
Zitieren
APA
Adams, M., Huijer, A., Kassapoglou, C., Vaders, J. A. A., & Pahlavan, L. (2024). In Situ Non-Destructive Stiffness Assessment of Fiber Reinforced Composite Plates Using Ultrasonic Guided Waves. Sensors, 24(9), 2747. https://doi.org/10.3390/s24092747
Vancouver
Adams M, Huijer A, Kassapoglou C, Vaders JAA, Pahlavan L. In Situ Non-Destructive Stiffness Assessment of Fiber Reinforced Composite Plates Using Ultrasonic Guided Waves. Sensors. 2024;24(9):2747. doi:10.3390/s24092747
BibTeX
@article{Adams2024,
author = {Adams, Maarten and Huijer, Arnaud and Kassapoglou, Christos and Vaders, Johannes A A and Pahlavan, Lotfollah},
title = {In Situ Non-Destructive Stiffness Assessment of Fiber Reinforced Composite Plates Using Ultrasonic Guided Waves},
journal = {Sensors},
year = {2024},
volume = {24},
number = {9},
pages = {2747},
doi = {10.3390/s24092747}
}
EUVIMED