EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Machine Tool Wear Prediction Technology Based on Multi-Sensor Information Fusion

Kang Wang, Aimin Wang, Long Wu, Guangjun Xie

Sensors · 21.04.2024 · 24 (8) · 2652

DOI: 10.3390/s24082652 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 21.04.2024. Verfasst von Kang Wang und 3 weiteren Autor:innen. Beteiligte Einrichtung: Digital Manufacturing Institute, Beijing Institute of Technology, Beijing 100081, China. Die Arbeit wurde bisher 45-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The intelligent monitoring of cutting tools used in the manufacturing industry is steadily becoming more convenient. To accurately predict the state of tools and tool breakages, this study proposes a tool wear prediction technique based on multi-sensor information fusion. First, the vibrational, current, and cutting force signals transmitted during the machining process were collected, and the features were extracted. Next, the Kalman filtering algorithm was used for feature fusion, and a predictive model for tool wear was constructed by combining the ResNet and long short-term memory (LSTM) models (called ResNet-LSTM). Experimental data for thin-walled parts obtained under various machining conditions were utilized to monitor the changes in tool conditions. A comparison between the ResNet and LSTM tool wear prediction models indicated that the proposed ResNet-LSTM model significantly improved the prediction accuracy compared to the individual LSTM and ResNet models. Moreover, ResNet-LSTM exhibited adaptive noise reduction capabilities at the front end of the network for signal feature extraction, thereby enhancing the signal feature extraction capability. The ResNet-LSTM model yielded an average prediction error of 0.0085 mm and a tool wear prediction accuracy of 98.25%. These results validate the feasibility of the tool wear prediction method proposed in this study.

Schlagwörter

Stichwörter der Autor:innen

LSTM networkdeep residual networkmulti-sensor information fusiontool wear prediction

Autor:innen und Institutionen

  • Digital Manufacturing Institute, Beijing Institute of Technology, Beijing 100081, China.
  • School of Mechanical and Electrical Engineering, Shandong Jianzhu University, Jinan 250101, China.
  • Department of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China.

Zitieren

APA

Wang, K., Wang, A., Wu, L., & Xie, G. (2024). Machine Tool Wear Prediction Technology Based on Multi-Sensor Information Fusion. Sensors, 24(8), 2652. https://doi.org/10.3390/s24082652

Vancouver

Wang K, Wang A, Wu L, Xie G. Machine Tool Wear Prediction Technology Based on Multi-Sensor Information Fusion. Sensors. 2024;24(8):2652. doi:10.3390/s24082652

BibTeX
@article{Wang2024,
  author = {Wang, Kang and Wang, Aimin and Wu, Long and Xie, Guangjun},
  title = {Machine Tool Wear Prediction Technology Based on Multi-Sensor Information Fusion},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {8},
  pages = {2652},
  doi = {10.3390/s24082652}
}
Kostenlos starten →