Development of a Two-Finger Haptic Robotic Hand with Novel Stiffness Detection and Impedance Control
Sensors · 2024
DOI: 10.3390/s24082585 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, 2024. Verfasst von Vahid Mohammadi und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomechanics, University of Nebraska Omaha, Omaha, NE 68106, USA. Hauptthemen laut MEDLINE: Robotics, Fingers, Touch, Hand Strength. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Haptic hands and grippers, designed to enable skillful object manipulation, are pivotal for high-precision interaction with environments. These technologies are particularly vital in fields such as minimally invasive surgery, where they enhance surgical accuracy and tactile feedback: in the development of advanced prosthetic limbs, offering users improved functionality and a more natural sense of touch, and within industrial automation and manufacturing, they contribute to more efficient, safe, and flexible production processes. This paper presents the development of a two-finger robotic hand that employs simple yet precise strategies to manipulate objects without damaging or dropping them. Our innovative approach fused force-sensitive resistor (FSR) sensors with the average current of servomotors to enhance both the speed and accuracy of grasping. Therefore, we aim to create a grasping mechanism that is more dexterous than grippers and less complex than robotic hands. To achieve this goal, we designed a two-finger robotic hand with two degrees of freedom on each finger; an FSR was integrated into each fingertip to enable object categorization and the detection of the initial contact. Subsequently, servomotor currents were monitored continuously to implement impedance control and maintain the grasp of objects in a wide range of stiffness. The proposed hand categorized objects’ stiffness upon initial contact and exerted accurate force by fusing FSR and the motor currents. An experimental test was conducted using a Yale–CMU–Berkeley (YCB) object set consisted of a foam ball, an empty soda can, an apple, a glass cup, a plastic cup, and a small milk packet. The robotic hand successfully picked up these objects from a table and sat them down without inflicting any damage or dropping them midway. Our results represent a significant step forward in developing haptic robotic hands with advanced object perception and manipulation capabilities.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Biomechanics, University of Nebraska Omaha, Omaha, NE 68106, USA.
- Institute of Computer Science, University of Bonn, 53115 Bonn, Germany.
- Mechanical and Aerospace Engineering Department, Old Dominion University, Norfolk, VA 23508, USA.
- Center for Health Innovation, Staffordshire University, Staffordshire ST4 2XE, UK.
- School of Mechatronic System Engineering, Simon Fraser University, Surrey, BC V5A 1S6, Canada.
ORCID-Profile: Vahid Mohammadi, Saeed Shiry Ghidary, Farshid Najafi, Ahad Behboodi
Zitieren
APA
Mohammadi, V., Shahbad, R., Hosseini, M., Gholampour, M. H., Shiry Ghidary, S., Najafi, F., & Behboodi, A. (2024). Development of a Two-Finger Haptic Robotic Hand with Novel Stiffness Detection and Impedance Control. Sensors. https://doi.org/10.3390/s24082585
Vancouver
Mohammadi V, Shahbad R, Hosseini M, Gholampour MH, Shiry Ghidary S, Najafi F, et al. Development of a Two-Finger Haptic Robotic Hand with Novel Stiffness Detection and Impedance Control. Sensors. 2024. doi:10.3390/s24082585
BibTeX
@article{Mohammadi2024,
author = {Mohammadi, Vahid and Shahbad, Ramin and Hosseini, Mojtaba and Gholampour, Mohammad Hossein and Shiry Ghidary, Saeed and Najafi, Farshid and Behboodi, Ahad},
title = {Development of a Two-Finger Haptic Robotic Hand with Novel Stiffness Detection and Impedance Control},
journal = {Sensors},
year = {2024},
doi = {10.3390/s24082585}
}
EUVIMED