EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Shape Sensing of Cantilever Column Using Hybrid Frenet–Serret Homogeneous Transformation Matrix Method

Peng Zhang iD, Duanshu Li, Ran An, Patil Devendra

Sensors · 15.04.2024 · 24 (8) · 2533

DOI: 10.3390/s24082533 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 15.04.2024. Verfasst von Peng Zhang und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Dalian Maritime University, Dalian 116026, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the open fund of State Key Laboratory of Coastal and Offshore Engineering, National Natural Science Foundation of China (NSFC), O.P.E.R.A. award.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Frenet–Serret (FS) framework stands as a pivotal tool in shape sensing for various infrastructures. However, this tool suffers from accumulative errors, particularly at inflection points where the normal vector undergoes sign changes. To minimize the error, the traditional FS framework is modified by incorporating the homogeneous matrix transformation (HMT) method for segments containing inflection points. Additionally, inclination information is also used to calculate the unit tangent vector and the unit norm vector at the start point of each segment. This novel approach, termed the FS-HMT method, aims to enhance accuracy. To validate the effectiveness of the proposed method, a simulation of a cantilever column was conducted using finite element software ANSYS 19.2. The numerical results demonstrate the capability of the proposed method to accurately predict curves with inflection points, yielding a maximum error of 1.1%. Subsequently, experimental verification was performed using a 1 m long spring steel sheet, showcasing an error of 4.9%, which is notably lower than that of the traditional FS framework. Our proposed modified FS framework exhibits improved accuracy, especially in scenarios involving inflection points. These findings underscore its potential as a valuable tool for enhanced shape sensing in practical applications.

Schlagwörter

Stichwörter der Autor:innen

Frenet–Serret frameworkdisplacement reconstructionhomogeneous transmission matrixshape sensing

Autor:innen und Institutionen

  • Department of Civil Engineering, Dalian Maritime University, Dalian 116026, China.
  • Department of Mechanical Engineering, BITS Pilani K K Birla Goa Campus, Zuarinagar 403726, India.

ORCID-Profile: Peng Zhang

Förderung

  • the open fund of State Key Laboratory of Coastal and Offshore Engineering
  • National Natural Science Foundation of China (NSFC)
  • O.P.E.R.A. award
  • DST-SRG grant

Zitieren

APA

Zhang, P., Li, D., An, R., & Devendra, P. (2024). Shape Sensing of Cantilever Column Using Hybrid Frenet–Serret Homogeneous Transformation Matrix Method. Sensors, 24(8), 2533. https://doi.org/10.3390/s24082533

Vancouver

Zhang P, Li D, An R, Devendra P. Shape Sensing of Cantilever Column Using Hybrid Frenet–Serret Homogeneous Transformation Matrix Method. Sensors. 2024;24(8):2533. doi:10.3390/s24082533

BibTeX
@article{Zhang2024,
  author = {Zhang, Peng and Li, Duanshu and An, Ran and Devendra, Patil},
  title = {Shape Sensing of Cantilever Column Using Hybrid Frenet–Serret Homogeneous Transformation Matrix Method},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {8},
  pages = {2533},
  doi = {10.3390/s24082533}
}
Kostenlos starten →