A New Denoising Method for Belt Conveyor Roller Fault Signals
Sensors · 11.04.2024 · 24 (8) · 2446
DOI: 10.3390/s24082446 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 11.04.2024. Verfasst von Xuedi Hao und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, China University of Mining and Technology (Beijing), Beijing 100083, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hebei Provincial Department of Science and Technology, National Natural Science Foundation of China, Department of Science and Technology of Hebei Province, China.
Abstract (Originalsprache)
In the process of the intelligent inspection of belt conveyor systems, due to problems such as its long duration, the large number of rollers, and the complex working environment, fault diagnosis by acoustic signals is easily affected by signal coupling interference, which poses a great challenge to selecting denoising methods of signal preprocessing. This paper proposes a novel wavelet threshold denoising algorithm by integrating a new biparameter and trisegment threshold function. Firstly, we elaborate on the mutual influence and optimization process of two adjustment parameters and three wavelet coefficient processing intervals in the BT-WTD (the biparameter and trisegment of wavelet threshold denoising, BT-WTD) denoising model. Subsequently, the advantages of the proposed threshold function are theoretically demonstrated. Finally, the BT-WTD algorithm is applied to denoise the simulation signals and the vibration and acoustic signals collected from the belt conveyor experimental platform. The experimental results indicate that this method’s denoising effectiveness surpasses that of traditional threshold function denoising algorithms, effectively addressing the denoising preprocessing of idler roller fault signals under strong noise backgrounds while preserving useful signal features and avoiding signal distortion problems. This research lays the theoretical foundation for the non-contact intelligent fault diagnosis of future inspection robots based on acoustic signals.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Mechanical and Electrical Engineering, China University of Mining and Technology (Beijing), Beijing 100083, China.
- CITIC HIC Kaicheng Intelligence, Tangshan 063083, China.
ORCID-Profile: Xuedi Hao
Förderung
- Hebei Provincial Department of Science and Technology
- National Natural Science Foundation of China
- Department of Science and Technology of Hebei Province, China
- Innovation Research Group Project of the National Natural Science Foundation of China
Zitieren
APA
Hao, X., Zhang, J., Gao, Y., Zhu, C., Tang, S., Guo, P., & Pei, W. (2024). A New Denoising Method for Belt Conveyor Roller Fault Signals. Sensors, 24(8), 2446. https://doi.org/10.3390/s24082446
Vancouver
Hao X, Zhang J, Gao Y, Zhu C, Tang S, Guo P, et al. A New Denoising Method for Belt Conveyor Roller Fault Signals. Sensors. 2024;24(8):2446. doi:10.3390/s24082446
BibTeX
@article{Hao2024,
author = {Hao, Xuedi and Zhang, Jiajin and Gao, Yingzong and Zhu, Chenze and Tang, Shuo and Guo, Pengfei and Pei, Wenliang},
title = {A New Denoising Method for Belt Conveyor Roller Fault Signals},
journal = {Sensors},
year = {2024},
volume = {24},
number = {8},
pages = {2446},
doi = {10.3390/s24082446}
}
EUVIMED