EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Integration of Railway Bridge Structural Health Monitoring into the Internet of Things with a Digital Twin: A Case Study

Alberto Armijo iD, Diego Zamora-Sánchez iD

Sensors · 26.03.2024 · 24 (7) · 2115

DOI: 10.3390/s24072115 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 26.03.2024. Verfasst von Alberto Armijo und 1 weiteren Autor:innen. Beteiligte Einrichtung: TECNALIA, Basque Research and Technology Alliance (BRTA), Astondo Bidea, Edificio 700, 48160 Derio, Spain. Die Arbeit wurde bisher 61-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Basque Government, European Commission, European Regional Development Fund (FEDER).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Structural health monitoring (SHM) is critical for ensuring the safety of infrastructure such as bridges. This article presents a digital twin solution for the SHM of railway bridges using low-cost wireless accelerometers and machine learning (ML). The system architecture combines on-premises edge computing and cloud analytics to enable efficient real-time monitoring and complete storage of relevant time-history datasets. After train crossings, the accelerometers stream raw vibration data, which are processed in the frequency domain and analyzed using machine learning to detect anomalies that indicate potential structural issues. The digital twin approach is demonstrated on an in-service railway bridge for which vibration data were collected over two years under normal operating conditions. By learning allowable ranges for vibration patterns, the digital twin model identifies abnormal spectral peaks that indicate potential changes in structural integrity. The long-term pilot proves that this affordable SHM system can provide automated and real-time warnings of bridge damage and also supports the use of in-house-designed sensors with lower cost and edge computing capabilities such as those used in the demonstration. The successful on-premises–cloud hybrid implementation provides a cost effective and scalable model for expanding monitoring to thousands of railway bridges, democratizing SHM to improve safety by avoiding catastrophic failures.

Schlagwörter

Stichwörter der Autor:innen

MLOpsbuilding information modeling (BIM)digital twin (DT)hybrid computinglow-cost MEMS accelerometersmachine learning (ML)railway bridgesstructural health monitoring (SHM)vibration-based monitoringwireless sensor networks (WSNs)

Autor:innen und Institutionen

  • TECNALIA, Basque Research and Technology Alliance (BRTA), Astondo Bidea, Edificio 700, 48160 Derio, Spain.

ORCID-Profile: Alberto Armijo, Diego Zamora-Sánchez

Förderung

  • Basque Government
  • European Commission
  • European Regional Development Fund (FEDER)
  • The Horizon Europe (HE) programme within MULTICLIMACT project

Zitieren

APA

Armijo, A., & Zamora-Sánchez, D. (2024). Integration of Railway Bridge Structural Health Monitoring into the Internet of Things with a Digital Twin: A Case Study. Sensors, 24(7), 2115. https://doi.org/10.3390/s24072115

Vancouver

Armijo A, Zamora-Sánchez D. Integration of Railway Bridge Structural Health Monitoring into the Internet of Things with a Digital Twin: A Case Study. Sensors. 2024;24(7):2115. doi:10.3390/s24072115

BibTeX
@article{Armijo2024,
  author = {Armijo, Alberto and Zamora-Sánchez, Diego},
  title = {Integration of Railway Bridge Structural Health Monitoring into the Internet of Things with a Digital Twin: A Case Study},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {7},
  pages = {2115},
  doi = {10.3390/s24072115}
}
Kostenlos starten →