Topology Optimization Design Method for Acoustic Imaging Array of Power Equipment
Sensors · 22.03.2024 · 24 (7) · 2032
DOI: 10.3390/s24072032 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 22.03.2024. Verfasst von Jun Xiong und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Electrical Engineering and Automation, Wuhan University, Wuhan 430072, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Acoustic imaging technology has the advantages of non-contact and intuitive positioning. It is suitable for the rapid positioning of defects such as the mechanical loosening, discharge, and DC bias of power equipment. However, the existing research lacks the optimization design of microphone array topology. The acoustic frequency domain characteristics of typical power equipment are elaborately sorted out. After that, the cut-off frequencies of acoustic imaging instruments are determined, to meet the needs of the full bandwidth test requirements. Through a simulation calculation, the circular array is demonstrated to be the optimal shape. And the design parameters affect the imaging performance of the array to varying degrees, indicating that it is difficult to obtain the optimal array topology by an exhaustive method. Aimed at the complex working conditions of power equipment, a topology optimization design method of an acoustic imaging array for power equipment is proposed, and the global optimal solution of microphone array topology is obtained. Compared with the original array, the imaging performance of the improved LF and HF array is promoted by 54% and 49%, respectively. Combined with the simulation analysis and laboratory test, it is verified that the improved array can not only accurately locate the single sound source but also accurately identify the main sound source from the interference of the contiguous sound source.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Electrical Engineering and Automation, Wuhan University, Wuhan 430072, China.
Zitieren
APA
Xiong, J., Zha, X., Pei, X., & Zhou, W. (2024). Topology Optimization Design Method for Acoustic Imaging Array of Power Equipment. Sensors, 24(7), 2032. https://doi.org/10.3390/s24072032
Vancouver
Xiong J, Zha X, Pei X, Zhou W. Topology Optimization Design Method for Acoustic Imaging Array of Power Equipment. Sensors. 2024;24(7):2032. doi:10.3390/s24072032
BibTeX
@article{Xiong2024,
author = {Xiong, Jun and Zha, Xiaoming and Pei, Xuekai and Zhou, Wenjun},
title = {Topology Optimization Design Method for Acoustic Imaging Array of Power Equipment},
journal = {Sensors},
year = {2024},
volume = {24},
number = {7},
pages = {2032},
doi = {10.3390/s24072032}
}
EUVIMED