EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Flexible 3D Force Sensor Based on Polymer Nanocomposite for Soft Robotics and Medical Applications

Ahmed Alotaibi iD

Sensors · 2024

DOI: 10.3390/s24061859 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2024. Verfasst von Ahmed Alotaibi. Beteiligte Einrichtung: Department of Mechanical Engineering, College of Engineering, Taif University, Taif 21944, Saudi Arabia. Hauptthemen laut MEDLINE: Robotics, Nanocomposites, Fluorocarbon Polymers. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Deanship of Scientific Research at Taif University, Deanship of Scientific Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The three-dimensional (3D) force sensor has become essential in industrial and medical applications. The existing conventional 3D force sensors quantify the three-direction force components at a point of interest or extended contact area. However, they are typically made of rigid, complex structures and expensive materials, making them hard to implement in different soft or fixable industrial and medical applications. In this work, a new flexible 3D force sensor based on polymer nanocomposite (PNC) sensing elements was proposed and tested for its sensitivity to forces in the 3D space. Multi-walled carbon nanotube/polyvinylidene fluoride (MWCNT/PVDF) sensing element films were fabricated using the spray coating technique. The MWCNTs play an essential role in strain sensitivity in the sensing elements. They have been utilized for internal strain measurements of the fixable 3D force sensor’s structure in response to 3D forces. The MWCNT/PVDF was selected for its high sensitivity and capability to measure high and low-frequency forces. Four sensing elements were distributed into a cross-beam structure configuration, the most typically used solid 3D force sensor. Then, the sensing elements were inserted between two silicone rubber layers to enhance the sensor’s flexibility. The developed sensor was tested under different static and dynamic loading scenarios and exhibited excellent sensitivity and ability to distinguish between tension and compression force directions. The proposed sensor can be implemented in vast applications, including soft robotics and prostheses’ internal forces of patients with limb amputations.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

RoboticsNanocompositesFluorocarbon PolymersHumansPolyvinylsPolymers

Stichwörter der Autor:innen

3D force sensorflexiblemeasurementspolymer nanocompositestraintactile

Substanzen

polyvinylidene fluoridePolyvinylsPolymersFluorocarbon Polymers

Autor:innen und Institutionen

  • Department of Mechanical Engineering, College of Engineering, Taif University, Taif 21944, Saudi Arabia.

ORCID-Profile: Ahmed Alotaibi

Förderung

  • The Deanship of Scientific Research at Taif University
  • Deanship of Scientific Research

Zitieren

APA

Alotaibi, A. (2024). Flexible 3D Force Sensor Based on Polymer Nanocomposite for Soft Robotics and Medical Applications. Sensors. https://doi.org/10.3390/s24061859

Vancouver

Alotaibi A. Flexible 3D Force Sensor Based on Polymer Nanocomposite for Soft Robotics and Medical Applications. Sensors. 2024. doi:10.3390/s24061859

BibTeX
@article{Alotaibi2024,
  author = {Alotaibi, Ahmed},
  title = {Flexible 3D Force Sensor Based on Polymer Nanocomposite for Soft Robotics and Medical Applications},
  journal = {Sensors},
  year = {2024},
  doi = {10.3390/s24061859}
}
Kostenlos starten →