Upgraded Three-Wavelength Lidar for Real-Time Observations of Volcanic Aerosol Optical and Microphysical Properties at Etna (Italy): Calibration Procedures and Measurement Tests
Sensors · 08.03.2024 · 24 (6) · 1762
DOI: 10.3390/s24061762 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 08.03.2024. Verfasst von Matteo Manzo und 7 weiteren Autor:innen. Beteiligte Einrichtung: Dipartimento di Fisica "Ettore Pancini", Università di Napoli Federico II, Complesso Universitario di Monte S. Angelo, 80126 Napoli, Italy. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ITINERIS, Italian Integrated Environmental Research Infrastructures System.
Abstract (Originalsprache)
An innovative mobile lidar device, developed to monitor volcanic plumes during explosive eruptions at Mt. Etna (Italy) and to analyse the optical properties of volcanic particles, was upgraded in October 2023 with the aim of improving volcanic plume retrievals. The new configuration of the lidar allows it to obtain new data on both the optical and the microphysical properties of the atmospheric aerosol. In fact, after the upgrade, the lidar is able to measure three backscattering coefficients, two extinction coefficients and two depolarisation ratios in a configuration defined as “state-of-the-art lidar”, where properties such as particle size distribution and the refractive index can be derived. During the lidar implementation, we were able to test the system’s performance through specific calibration measurements. A comparison in an aerosol-free region (7.2–12 km) between lidar signals at 1064 nm, 532 nm and 355 nm and the corresponding pure molecular profiles showed a relative difference of
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Dipartimento di Fisica "Ettore Pancini", Università di Napoli Federico II, Complesso Universitario di Monte S. Angelo, 80126 Napoli, Italy.
- Istituto Nazionale di Geofisica e Vulcanologia, Osservatorio Etneo, Piazza Roma 2, 95125 Catania, Italy.
- Consiglio Nazionale delle Ricerche, Istituto di Metodologie per l'Analisi Ambientale (IMAA-CNR), 85050 Tito Scalo, Potenza, Italy.
- Agenzia Nazionale per le Nuove Tecnologie, l'Energia e lo Sviluppo Economico Sostenibile (ENEA)-Unità Tecnica Antartide C.R. Casaccia, 00123 Roma, Italy.
ORCID-Profile: Matteo Manzo, Antonella Boselli, Riccardo Damiano, Simona Scollo
Förderung
- ITINERIS, Italian Integrated Environmental Research Infrastructures System
Zitieren
APA
Manzo, M., Aiesi, G., Boselli, A., Consoli, S., Damiano, R., Di Donfrancesco, G., Saraceno, B., & Scollo, S. (2024). Upgraded Three-Wavelength Lidar for Real-Time Observations of Volcanic Aerosol Optical and Microphysical Properties at Etna (Italy): Calibration Procedures and Measurement Tests. Sensors, 24(6), 1762. https://doi.org/10.3390/s24061762
Vancouver
Manzo M, Aiesi G, Boselli A, Consoli S, Damiano R, Di Donfrancesco G, et al. Upgraded Three-Wavelength Lidar for Real-Time Observations of Volcanic Aerosol Optical and Microphysical Properties at Etna (Italy): Calibration Procedures and Measurement Tests. Sensors. 2024;24(6):1762. doi:10.3390/s24061762
BibTeX
@article{Manzo2024,
author = {Manzo, Matteo and Aiesi, Gianpiero and Boselli, Antonella and Consoli, Salvatore and Damiano, Riccardo and Di Donfrancesco, Guido and Saraceno, Benedetto and Scollo, Simona},
title = {Upgraded Three-Wavelength Lidar for Real-Time Observations of Volcanic Aerosol Optical and Microphysical Properties at Etna (Italy): Calibration Procedures and Measurement Tests},
journal = {Sensors},
year = {2024},
volume = {24},
number = {6},
pages = {1762},
doi = {10.3390/s24061762}
}
EUVIMED