EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electrochemical Sensors Based on Self-Assembling Peptide/Carbon Nanotube Nanocomposites for Sensitive Detection of Bisphenol A

Yuhang Zhang, Tingting Shao, Hangyu Zhang iD

Sensors · 23.02.2024 · 24 (5) · 1465

DOI: 10.3390/s24051465 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 23.02.2024. Verfasst von Yuhang Zhang und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Biomedical Engineering, Faculty of Medicine, Dalian University of Technology, Dalian 116024, China. Hauptthemen laut MEDLINE: Nanotubes, Carbon, Nanocomposites, Benzhydryl Compounds, Phenols. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a cationic amphiphilic self-assembling peptide (SAP) Z23 was designed, and a simple bisphenol a (BPA) sensor, based on SAP Z23/multiwalled carbon nanotubes (Z23/MWCNTs) composite, was successfully fabricated on the surface of a glassy carbon electrode (GCE). The composite material was formed by π-π stacking interaction between the aromatic group on the hydrophobic side of Z23 and the side-wall of MWCNTs, with the charged hydrophilic group of Z23 exposed. During the electrocatalytic process of BPA, a synergistic effect was observed between Z23 and MWCNTs. The current response of the sensor based on composite material was 3.24 times that of the MWCNTs-modified electrode, which was much higher than that of the peptide-based electrode. Differential pulse voltammetry (DPV) was used to optimize the experimental conditions affecting the analytical performance of the modified electrode. Under optimal conditions, the linear range of the sensor was from 10 nM to 100 μM by amperometric measurement with sensitivity and limit of detection (LOD) at 6.569 μAμM−1cm−2 and 1.28 nM (S/N = 3), respectively. Consequently, the sensor has excellent electrochemical performance and is easy to fabricate, making it a good prospect in the field of electrochemical detection in the future.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Nanotubes, CarbonNanocompositesBenzhydryl CompoundsPhenolsElectrochemical TechniquesLimit of DetectionElectrodesBisphenol A Compounds

Stichwörter der Autor:innen

bisphenol Acarbon nanotubeelectrochemicalself-assembling peptidesensor

Substanzen

Nanotubes, CarbonBenzhydryl CompoundsPhenolsbisphenol ABisphenol A Compounds

Autor:innen und Institutionen

  • School of Biomedical Engineering, Faculty of Medicine, Dalian University of Technology, Dalian 116024, China.
  • Liaoning Key Lab of Integrated Circuit and Biomedical Electronic System, Dalian University of Technology, Dalian 116024, China.

ORCID-Profile: Hangyu Zhang

Förderung

  • National Key R&D Program of China
  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities
  • National Key R&D Program of China

Zitieren

APA

Zhang, Y., Shao, T., & Zhang, H. (2024). Electrochemical Sensors Based on Self-Assembling Peptide/Carbon Nanotube Nanocomposites for Sensitive Detection of Bisphenol A. Sensors, 24(5), 1465. https://doi.org/10.3390/s24051465

Vancouver

Zhang Y, Shao T, Zhang H. Electrochemical Sensors Based on Self-Assembling Peptide/Carbon Nanotube Nanocomposites for Sensitive Detection of Bisphenol A. Sensors. 2024;24(5):1465. doi:10.3390/s24051465

BibTeX
@article{Zhang2024,
  author = {Zhang, Yuhang and Shao, Tingting and Zhang, Hangyu},
  title = {Electrochemical Sensors Based on Self-Assembling Peptide/Carbon Nanotube Nanocomposites for Sensitive Detection of Bisphenol A},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {5},
  pages = {1465},
  doi = {10.3390/s24051465}
}
Kostenlos starten →