Biomechanical Effects of Using a Passive Exoskeleton for the Upper Limb in Industrial Manufacturing Activities: A Pilot Study
Sensors · 23.02.2024 · 24 (5) · 1445
DOI: 10.3390/s24051445 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 23.02.2024. Verfasst von Armando Coccia und 6 weiteren Autor:innen. Beteiligte Einrichtung: Bioengineering Unit of Telese Terme Institute, Istituti Clinici Scientifici Maugeri IRCCS, 82037 Telese Terme, BN, Italy. Hauptthemen laut MEDLINE: Exoskeleton Device. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigates the biomechanical impact of a passive Arm-Support Exoskeleton (ASE) on workers in wool textile processing. Eight workers, equipped with surface electrodes for electromyography (EMG) recording, performed three industrial tasks, with and without the exoskeleton. All tasks were performed in an upright stance involving repetitive upper limbs actions and overhead work, each presenting different physical demands in terms of cycle duration, load handling and percentage of cycle time with shoulder flexion over 80°. The use of ASE consistently lowered muscle activity in the anterior and medial deltoid compared to the free condition (reduction in signal Root Mean Square (RMS) −21.6% and −13.6%, respectively), while no difference was found for the Erector Spinae Longissimus (ESL) muscle. All workers reported complete satisfaction with the ASE effectiveness as rated on Quebec User Evaluation of Satisfaction with Assistive Technology (QUEST), and 62% of the subjects rated the usability score as very high (>80 System Usability Scale (SUS)). The reduction in shoulder flexor muscle activity during the performance of industrial tasks is not correlated to the level of ergonomic risk involved. This preliminary study affirms the potential adoption of ASE as support for repetitive activities in wool textile processing, emphasizing its efficacy in reducing shoulder muscle activity. Positive worker acceptance and intention to use ASE supports its broader adoption as a preventive tool in the occupational sector.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Bioengineering Unit of Telese Terme Institute, Istituti Clinici Scientifici Maugeri IRCCS, 82037 Telese Terme, BN, Italy.
- Occupational Therapy and Ergonomics Unit of Pavia Institute, Istituti Clinici Scientifici Maugeri IRCCS, 27100 Pavia, PV, Italy.
- Department of Clinical-Surgical, Diagnostic and Pediatrics, University of Pavia, 27100 Pavia, PV, Italy.
- Occupational Therapy and Ergonomics Unit of Montescano Institute, Istituti Clinici Scientifici Maugeri IRCCS, 27040 Montescano, PV, Italy.
- Bioengineering Unit of Bari Institute, Istituti Clinici Scientifici Maugeri IRCCS, 70124 Bari, BA, Italy.
ORCID-Profile: Armando Coccia, Edda Maria Capodaglio, Federica Amitrano, Gaetano Pagano
Zitieren
APA
Coccia, A., Capodaglio, E. M., Amitrano, F., Gabba, V., Panigazzi, M., Pagano, G., & D'Addio, G. (2024). Biomechanical Effects of Using a Passive Exoskeleton for the Upper Limb in Industrial Manufacturing Activities: A Pilot Study. Sensors, 24(5), 1445. https://doi.org/10.3390/s24051445
Vancouver
Coccia A, Capodaglio EM, Amitrano F, Gabba V, Panigazzi M, Pagano G, et al. Biomechanical Effects of Using a Passive Exoskeleton for the Upper Limb in Industrial Manufacturing Activities: A Pilot Study. Sensors. 2024;24(5):1445. doi:10.3390/s24051445
BibTeX
@article{Coccia2024,
author = {Coccia, Armando and Capodaglio, Edda Maria and Amitrano, Federica and Gabba, Vittorio and Panigazzi, Monica and Pagano, Gaetano and D'Addio, Giovanni},
title = {Biomechanical Effects of Using a Passive Exoskeleton for the Upper Limb in Industrial Manufacturing Activities: A Pilot Study},
journal = {Sensors},
year = {2024},
volume = {24},
number = {5},
pages = {1445},
doi = {10.3390/s24051445}
}
EUVIMED