EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Lightweight and Real-Time Infrared Image Processor Based on FPGA

Xiaoqing Wang iD, Xiang He, Xiangyu Zhu, Fu Zheng iD, Jingqi Zhang iD

Sensors · 19.02.2024 · 24 (4) · 1333

DOI: 10.3390/s24041333 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 19.02.2024. Verfasst von Xiaoqing Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Center for Quantum Technology Research and Key Laboratory of Advanced Optoelectronic Quantum Architecture and Measurements (MOE), School of Physics, …. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, National Key R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents an FPGA-based lightweight and real-time infrared image processor based on a series of hardware-oriented lightweight algorithms. The two-point correction algorithm based on blackbody radiation is introduced to calibrate the non-uniformity of the sensor. With precomputed gain and offset matrices, the design can achieve real-time non-uniformity correction with a resolution of 640×480. The blind pixel detection algorithm employs the first-level approximation to simplify multiple iterative computations. The blind pixel compensation algorithm in our design is constructed on the side-window-filtering method. The results of eight convolution kernels for side windows are computed simultaneously to improve the processing speed. Due to the proposed side-window-filtering-based blind pixel compensation algorithm, blind pixels can be effectively compensated while details in the image are preserved. Before image output, we also incorporated lightweight histogram equalization to make the processed image more easily observable to the human eyes. The proposed lightweight infrared image processor is implemented on Xilinx XC7A100T-2. Our proposed lightweight infrared image processor costs 10,894 LUTs, 9367 FFs, 4 BRAMs, and 5 DSP48. Under a 50 MHz clock, the processor achieves a speed of 30 frames per second at the cost of 1800 mW. The maximum operating frequency of our proposed processor can reach 186 MHz. Compared with existing similar works, our proposed infrared image processor incurs minimal resource overhead and has lower power consumption.

Schlagwörter

Stichwörter der Autor:innen

edge-preserving filteringfield programmable gate arrayinfrared image processingnon-uniformity correction

Autor:innen und Institutionen

  • Center for Quantum Technology Research and Key Laboratory of Advanced Optoelectronic Quantum Architecture and Measurements (MOE), School of Physics, Beijing Institute of Technology, Beijing 100081, China.
  • Key Laboratory of Electronics and Information Technology for Space Systems, National Space Science Center, Chinese Academy of Sciences, Beijing 100090, China.
  • School of Integrated Circuits and Electronics, Beijing Institute of Technology, Beijing 100081, China.

ORCID-Profile: Xiaoqing Wang, Fu Zheng, Jingqi Zhang

Förderung

  • National Key Research and Development Program of China
  • National Key R&D Program of China

Zitieren

APA

Wang, X., He, X., Zhu, X., Zheng, F., & Zhang, J. (2024). Lightweight and Real-Time Infrared Image Processor Based on FPGA. Sensors, 24(4), 1333. https://doi.org/10.3390/s24041333

Vancouver

Wang X, He X, Zhu X, Zheng F, Zhang J. Lightweight and Real-Time Infrared Image Processor Based on FPGA. Sensors. 2024;24(4):1333. doi:10.3390/s24041333

BibTeX
@article{Wang2024,
  author = {Wang, Xiaoqing and He, Xiang and Zhu, Xiangyu and Zheng, Fu and Zhang, Jingqi},
  title = {Lightweight and Real-Time Infrared Image Processor Based on FPGA},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {4},
  pages = {1333},
  doi = {10.3390/s24041333}
}
Kostenlos starten →