Fault Diagnosis of the Rolling Bearing by a Multi-Task Deep Learning Method Based on a Classifier Generative Adversarial Network
Sensors · 17.02.2024 · 24 (4) · 1290
DOI: 10.3390/s24041290 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 17.02.2024. Verfasst von Zhunan Shen und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key Research and Development Program of China, the Key Laboratory of Vibration and Control of Aero-Propulsion System, Ministry of Education, Northeastern University, the State Ministry of Science and Technology Innovation Fund of China.
Abstract (Originalsprache)
Accurate fault diagnosis is essential for the safe operation of rotating machinery. Recently, traditional deep learning-based fault diagnosis have achieved promising results. However, most of these methods focus only on supervised learning and tend to use small convolution kernels non-effectively to extract features that are not controllable and have poor interpretability. To this end, this study proposes an innovative semi-supervised learning method for bearing fault diagnosis. Firstly, multi-scale dilated convolution squeeze-and-excitation residual blocks are designed to exact local and global features. Secondly, a classifier generative adversarial network is employed to achieve multi-task learning. Both unsupervised and supervised learning are performed simultaneously to improve the generalization ability. Finally, supervised learning is applied to fine-tune the final model, which can extract multi-scale features and be further improved by implicit data augmentation. Experiments on two datasets were carried out, and the results verified the superiority of the proposed method.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819, China.
- Key Laboratory of Vibration and Control of Aero-Propulsion System, Ministry of Education, Northeastern University, Shenyang 110819, China.
- Liaoning Province Key Laboratory of Multidisciplinary Design Optimization of Complex Equipment, North-Eastern University, Shenyang 110819, China.
- Dahua Technology Co., Ltd., Hangzhou 310053, China.
- School of Engineering and Materials Science, Queen Mary University of London, London E1 4NS, UK.
Förderung
- the National Key Research and Development Program of China
- the Key Laboratory of Vibration and Control of Aero-Propulsion System, Ministry of Education, Northeastern University
- the State Ministry of Science and Technology Innovation Fund of China
- the National Natural Foundation of China
- National Key Research and Development Program of China
- Key Laboratory of Vibration and Control of Aero-Propulsion System, Ministry of Education, Northeastern University
- State Ministry of Science and Technology Innovation Fund of China
- National Natural Foundation of China
Zitieren
APA
Shen, Z., Kong, X., Cheng, L., Wang, R., & Zhu, Y. (2024). Fault Diagnosis of the Rolling Bearing by a Multi-Task Deep Learning Method Based on a Classifier Generative Adversarial Network. Sensors, 24(4), 1290. https://doi.org/10.3390/s24041290
Vancouver
Shen Z, Kong X, Cheng L, Wang R, Zhu Y. Fault Diagnosis of the Rolling Bearing by a Multi-Task Deep Learning Method Based on a Classifier Generative Adversarial Network. Sensors. 2024;24(4):1290. doi:10.3390/s24041290
BibTeX
@article{Shen2024,
author = {Shen, Zhunan and Kong, Xiangwei and Cheng, Liu and Wang, Rengen and Zhu, Yunpeng},
title = {Fault Diagnosis of the Rolling Bearing by a Multi-Task Deep Learning Method Based on a Classifier Generative Adversarial Network},
journal = {Sensors},
year = {2024},
volume = {24},
number = {4},
pages = {1290},
doi = {10.3390/s24041290}
}
EUVIMED