Void-Engineered Metamaterial Delay Line with Built-In Impedance Matching for Ultrasonic Applications
Sensors · 03.02.2024 · 24 (3) · 995
DOI: 10.3390/s24030995 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 03.02.2024. Verfasst von Rajendra P Palanisamy und 3 weiteren Autor:innen. Beteiligte Einrichtung: Materials Physics and Applications (MPA), Los Alamos National Laboratory, Los Alamos, NM 87545, USA. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Los Alamos National Laboratory, Laboratory Directed Research and Development Program.
Abstract (Originalsprache)
Metamaterials exhibit unique ultrasonic properties that are not always achievable with traditional materials. However, the structures and geometries needed to achieve such properties are often complex and difficult to obtain using common fabrication techniques. In the present research work, we report a novel metamaterial acoustic delay line with built-in impedance matching that is fabricated using a common 3D printer. Delay lines are commonly used in ultrasonic inspection when signals need to be separated in time for improved sensitivity. However, if the impedance of the delay line is not perfectly matched with those of both the sensor and the target medium, a strong standing wave develops in the delay line, leading to a lower energy transmission. The presented metamaterial delay line was designed to match the acoustic impedance at both the sensor and target medium interfaces. This was achieved by introducing graded engineered voids with different densities at both ends of the delay line. The measured impedances of the designed metamaterial samples show a good match with the theoretical predictions. The experimental test results with concrete samples show that the acoustic energy transmission is increased by 120% and the standing wave in the delay line is reduced by over a factor of 2 compared to a commercial delay line.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Materials Physics and Applications (MPA), Los Alamos National Laboratory, Los Alamos, NM 87545, USA.
ORCID-Profile: Rajendra P Palanisamy
Förderung
- Los Alamos National Laboratory
- Laboratory Directed Research and Development Program
Zitieren
APA
Palanisamy, R. P., Chavez, L. A., Castro, R., & Findikoglu, A. T. (2024). Void-Engineered Metamaterial Delay Line with Built-In Impedance Matching for Ultrasonic Applications. Sensors, 24(3), 995. https://doi.org/10.3390/s24030995
Vancouver
Palanisamy RP, Chavez LA, Castro R, Findikoglu AT. Void-Engineered Metamaterial Delay Line with Built-In Impedance Matching for Ultrasonic Applications. Sensors. 2024;24(3):995. doi:10.3390/s24030995
BibTeX
@article{Palanisamy2024,
author = {Palanisamy, Rajendra P and Chavez, Luis A and Castro, Raymond and Findikoglu, Alp T},
title = {Void-Engineered Metamaterial Delay Line with Built-In Impedance Matching for Ultrasonic Applications},
journal = {Sensors},
year = {2024},
volume = {24},
number = {3},
pages = {995},
doi = {10.3390/s24030995}
}
EUVIMED