EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Reference-Free Vibration-Based Damage Identification Techniques for Bridge Structural Health Monitoring—A Critical Review and Perspective

Mohammad Moravvej, Mamdouh El-Badry iD

Sensors · 29.01.2024 · 24 (3) · 876

DOI: 10.3390/s24030876 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Sensors, online erschienen am 29.01.2024. Verfasst von Mohammad Moravvej und 1 weiteren Autor:innen. Beteiligte Einrichtung: T.Y. Lin International Canada Inc., Vancouver, BC V6C 1S4, Canada. Die Arbeit wurde bisher 44-mal zitiert (Crossref) und nennt 116 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bridges are designed and built to be safe against failure and perform satisfactorily over their service life. Bridge structural health monitoring (BSHM) systems are therefore essential to ensure the safety and serviceability of such critical transportation infrastructure. Identification of structural damage at the earliest time possible is a major goal of BSHM processes. Among many developed damage identification techniques (DITs), vibration-based techniques have shown great potential to be implemented in BSHM systems. In a vibration-based DIT, the response of a bridge is measured and analyzed in either time or space domain for the purpose of detecting damage-induced changes in the extracted dynamic properties of the bridge. This approach usually requires a comparison between two structural states of the bridge—the current state and a reference (intact/undamaged) state. In most in-situ cases, however, data on the bridge structural response in the reference state are not available. Therefore, researchers have been recently working on the development of DITs that eliminate the need for a prior knowledge of the reference state. This paper thoroughly explains why and how the reference state can be excluded from the damage identification process. It then reviews the state-of-the-art reference-free vibration-based DITs and summarizes their merits and shortcomings to give guidance on their applicability to BSHM systems. Finally, some recommendations are given for further research.

Schlagwörter

Stichwörter der Autor:innen

bridgesdamage identification techniques (DITs)reference-freestructural health monitoring (SHM)vibration

Autor:innen und Institutionen

  • T.Y. Lin International Canada Inc., Vancouver, BC V6C 1S4, Canada.
  • Department of Civil Engineering, University of Calgary, Calgary, AB T2N 1N4, Canada.

ORCID-Profile: Mamdouh El-Badry

Förderung

  • Natural Sciences and Engineering Research Council

Zitieren

APA

Moravvej, M., & El-Badry, M. (2024). Reference-Free Vibration-Based Damage Identification Techniques for Bridge Structural Health Monitoring—A Critical Review and Perspective. Sensors, 24(3), 876. https://doi.org/10.3390/s24030876

Vancouver

Moravvej M, El-Badry M. Reference-Free Vibration-Based Damage Identification Techniques for Bridge Structural Health Monitoring—A Critical Review and Perspective. Sensors. 2024;24(3):876. doi:10.3390/s24030876

BibTeX
@article{Moravvej2024,
  author = {Moravvej, Mohammad and El-Badry, Mamdouh},
  title = {Reference-Free Vibration-Based Damage Identification Techniques for Bridge Structural Health Monitoring—A Critical Review and Perspective},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {3},
  pages = {876},
  doi = {10.3390/s24030876}
}
Kostenlos starten →