EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigating the Mechanical Properties and Temperature Compensation of a Spot-Welded Strain Sensor within an Intelligent Steel Strand Cable

Nianchun Deng iD, Lehai Hu, Xin Liu, Zhiyu Tang iD

Sensors · 24.01.2024 · 24 (3) · 745

DOI: 10.3390/s24030745 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 24.01.2024. Verfasst von Nianchun Deng und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Civil Engineering and Architecture, Guangxi University, Nanning 530004, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Science and Technology Major Project of China, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

According to current regulations, welding is strictly prohibited for prestressed and tension cables. In response, this article proposes the use of a portable spot-welding machine to spot weld steel strands. This method generates a small current during spot welding, with a voltage of only 3 V to 5 V, and does not damage the internal structure of the steel strand. To effectively monitor cable tension in cable-supported structures, a novel approach utilizing a chip-based, encapsulated spot-welded strain sensor was investigated. The strain sensing capability, temperature sensitivity, stress relaxation, and static load responses were investigated on the proposed smart steel strand cables with spot-welded strain sensors. The theoretical analyses and finite element simulations revealed that the strain transfer efficiency of the spot-welded strain sensor exceeded 96%. The experimental results demonstrated that the load-strain relationship of the smart steel strand cable had a fitting degree greater than 0.999, and the tension errors obtained under different loads were within 1.26%. The tension full capacity errors measured at different temperatures were generally within 1.0%. The relaxation rate of the smart steel strand cable after 120 h was 3.78% and reduced the sensor accuracy error by 3.97%. Thus, the proposed strain sensor equipped with a smart steel strand cable is suitable for use in long-term tension monitoring.

Schlagwörter

Stichwörter der Autor:innen

cable forceintelligent steel strand cablespot-welding strain sensorstrain transfertemperature-sensitive characteristics

Autor:innen und Institutionen

  • College of Civil Engineering and Architecture, Guangxi University, Nanning 530004, China.
  • Guangxi Key Laboratory of Disaster Prevention and Engineering Safety, Nanning 530004, China.

ORCID-Profile: Nianchun Deng, Zhiyu Tang

Förderung

  • Guangxi Science and Technology Major Project of China
  • National Natural Science Foundation of China

Zitieren

APA

Deng, N., Hu, L., Liu, X., & Tang, Z. (2024). Investigating the Mechanical Properties and Temperature Compensation of a Spot-Welded Strain Sensor within an Intelligent Steel Strand Cable. Sensors, 24(3), 745. https://doi.org/10.3390/s24030745

Vancouver

Deng N, Hu L, Liu X, Tang Z. Investigating the Mechanical Properties and Temperature Compensation of a Spot-Welded Strain Sensor within an Intelligent Steel Strand Cable. Sensors. 2024;24(3):745. doi:10.3390/s24030745

BibTeX
@article{Deng2024,
  author = {Deng, Nianchun and Hu, Lehai and Liu, Xin and Tang, Zhiyu},
  title = {Investigating the Mechanical Properties and Temperature Compensation of a Spot-Welded Strain Sensor within an Intelligent Steel Strand Cable},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {3},
  pages = {745},
  doi = {10.3390/s24030745}
}
Kostenlos starten →