EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A 0.05 m Change in Inertial Measurement Unit Placement Alters Time and Frequency Domain Metrics during Running

Dovin Kiernan iD, Zachary David Katzman iD, David A Hawkins iD, Blaine Andrew Christiansen

Sensors · 2024

DOI: 10.3390/s24020656 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2024. Verfasst von Dovin Kiernan und 3 weiteren Autor:innen. Beteiligte Einrichtung: Biomedical Engineering Graduate Group, University of California Davis, Davis, CA 95616, USA. Hauptthemen laut MEDLINE: Running. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: American College of Sports Medicine, Sigma Xi, Natural Sciences and Engineering Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inertial measurement units (IMUs) provide exciting opportunities to collect large volumes of running biomechanics data in the real world. IMU signals may, however, be affected by variation in the initial IMU placement or movement of the IMU during use. To quantify the effect that changing an IMU’s location has on running data, a reference IMU was ‘correctly’ placed on the shank, pelvis, or sacrum of 74 participants. A second IMU was ‘misplaced’ 0.05 m away, simulating a ‘worst-case’ misplacement or movement. Participants ran over-ground while data were simultaneously recorded from the reference and misplaced IMUs. Differences were captured as root mean square errors (RMSEs) and differences in the absolute peak magnitudes and timings. RMSEs were ≤1 g and ~1 rad/s for all axes and misplacement conditions while mean differences in the peak magnitude and timing reached up to 2.45 g, 2.48 rad/s, and 9.68 ms (depending on the axis and direction of misplacement). To quantify the downstream effects of these differences, initial and terminal contact times and vertical ground reaction forces were derived from both the reference and misplaced IMU. Mean differences reached up to −10.08 ms for contact times and 95.06 N for forces. Finally, the behavior in the frequency domain revealed high coherence between the reference and misplaced IMUs (particularly at frequencies ≤~10 Hz). All differences tended to be exaggerated when data were analyzed using a wearable coordinate system instead of a segment coordinate system. Overall, these results highlight the potential errors that IMU placement and movement can introduce to running biomechanics data.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

RunningHumansLegBiomechanical PhenomenaMovementPelvisGait

Stichwörter der Autor:innen

accelerometersbiomechanicsgaitground reaction forcesgyroscopesin-fieldkinematicskineticslocomotionover-ground

Autor:innen und Institutionen

  • Biomedical Engineering Graduate Group, University of California Davis, Davis, CA 95616, USA.
  • Department of Neurobiology, Physiology & Behavior, University of California Davis, Davis, CA 95616, USA.
  • College of Podiatric Medicine and Surgery, Des Moines University, West Des Moines, IA 50266, USA.
  • Department of Orthopaedic Surgery, University of California Davis, Davis, CA 95616, USA.

ORCID-Profile: Dovin Kiernan, Zachary David Katzman, David A Hawkins

Förderung

  • American College of Sports Medicine
  • Sigma Xi
  • Natural Sciences and Engineering Research Council
  • Maury L Hull Endowed Fellowship for Musculoskeletal Biomechanics Research
  • University of California Davis Professors for the Future Fellowship
  • American College of Sports Medicine Foundation Doctoral Student Research Grant
  • Sigma Xi Scientific Research Honor Society Grant-in-Aid of Research
  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Kiernan, D., Katzman, Z. D., Hawkins, D. A., & Christiansen, B. A. (2024). A 0.05 m Change in Inertial Measurement Unit Placement Alters Time and Frequency Domain Metrics during Running. Sensors. https://doi.org/10.3390/s24020656

Vancouver

Kiernan D, Katzman ZD, Hawkins DA, Christiansen BA. A 0.05 m Change in Inertial Measurement Unit Placement Alters Time and Frequency Domain Metrics during Running. Sensors. 2024. doi:10.3390/s24020656

BibTeX
@article{Kiernan2024,
  author = {Kiernan, Dovin and Katzman, Zachary David and Hawkins, David A and Christiansen, Blaine Andrew},
  title = {A 0.05 m Change in Inertial Measurement Unit Placement Alters Time and Frequency Domain Metrics during Running},
  journal = {Sensors},
  year = {2024},
  doi = {10.3390/s24020656}
}
Kostenlos starten →