EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Designing and Testing an IoT Low-Cost PPP-RTK Augmented GNSS Location Device

Domenico Amalfitano iD, Matteo Cutugno iD, Umberto Robustelli iD, Giovanni Pugliano iD

Sensors · 19.01.2024 · 24 (2) · 646

DOI: 10.3390/s24020646 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 19.01.2024. Verfasst von Domenico Amalfitano und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical Engineering and Information Technology, University of Naples Federico II, 80125 Naples, Italy. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 1.4 - Call for tender No. 3138 of 16/12/2021 of Italian Ministry of University a…, National Research Centre for Agricultural Technologies, Italian Ministry of University and Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nowadays, the availability of affordable multi-constellation multi-frequency receivers has broadened access to accurate positioning. The abundance of satellite signals coupled with the implementation of ground- and satellite-based correction services has unlocked the potential for achieving real-time centimetre-level positioning with low-cost instrumentation. Most of the current and future applications cannot exploit well-consolidated satellite positioning techniques such as Network Real Time Kinematic (RTK) and Precise Point Positioning (PPP); the former is inapplicable for large user bases due to the necessity of a two-way communication link between the user and the NRTK service provider, while the latter necessitates long convergence times that are not in keeping with kinematic application. In this context, the hybrid PPP-RTK technique has emerged as a potential solution to meet the demand for real-time, low-cost, accurate, and precise positioning. This paper presents an Internet of Things (IoT) GNSS device developed with low-cost hardware; it leverages a commercial PPP-RTK correction service which delivers corrections via IP. The main target is to obtain both horizontal and vertical decimetre-level accuracies in urban kinematic tests, along with other requisites such as solution availability and the provision of connection ports for interfacing an IoT network. A vehicle-borne kinematic test has been conducted to evaluate the device performance. The results show that (i) the IoT device can deliver horizontal and vertical positioning solutions at decimetre-level accuracy with the targeted solution availability, and (ii) the provided IoT ports are feasible for gathering the position solutions over an internet connection.

Schlagwörter

Stichwörter der Autor:innen

GNSSIoTPPP-RTKPoint Perfecthigh-accuracy positioninglow-cost hardwaremass-market navigationu-blox ZED-F9P

Autor:innen und Institutionen

  • Department of Electrical Engineering and Information Technology, University of Naples Federico II, 80125 Naples, Italy.
  • University of Benevento Giustino Fortunato, 82100 Benevento, Italy.
  • Department of Engineering, University of Naples Parthenope, 80143 Naples, Italy.
  • Department of Civil, Architectural and Environmental Engineering, University of Naples Federico II, 80125 Naples, Italy.

ORCID-Profile: Domenico Amalfitano, Matteo Cutugno, Umberto Robustelli, Giovanni Pugliano

Förderung

  • National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 1.4 - Call for tender No. 3138 of 16/12/2021 of Italian Ministry of University a…
  • National Research Centre for Agricultural Technologies
  • Italian Ministry of University and Research

Zitieren

APA

Amalfitano, D., Cutugno, M., Robustelli, U., & Pugliano, G. (2024). Designing and Testing an IoT Low-Cost PPP-RTK Augmented GNSS Location Device. Sensors, 24(2), 646. https://doi.org/10.3390/s24020646

Vancouver

Amalfitano D, Cutugno M, Robustelli U, Pugliano G. Designing and Testing an IoT Low-Cost PPP-RTK Augmented GNSS Location Device. Sensors. 2024;24(2):646. doi:10.3390/s24020646

BibTeX
@article{Amalfitano2024,
  author = {Amalfitano, Domenico and Cutugno, Matteo and Robustelli, Umberto and Pugliano, Giovanni},
  title = {Designing and Testing an IoT Low-Cost PPP-RTK Augmented GNSS Location Device},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {2},
  pages = {646},
  doi = {10.3390/s24020646}
}
Kostenlos starten →