EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Real-Time Automated Defect Detection System for Ceramic Pieces Manufacturing Process Based on Computer Vision with Deep Learning

Esteban Cumbajin iD, Nuno Rodrigues iD, Paulo Costa, Rolando Miragaia iD, Luís Frazão iD, Nuno Costa iD, Antonio Fernández-Caballero iD, Jorge Carneiro, Leire H Buruberri, António Pereira iD

Sensors · 31.12.2023 · 24 (1) · 232

DOI: 10.3390/s24010232 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 31.12.2023. Verfasst von Esteban Cumbajin und 9 weiteren Autor:innen. Beteiligte Einrichtung: Computer Science and Communications Research Centre, School of Technology and Management, Polytechnic of Leiria, 2411-901 Leiria, Portugal. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia, project STC 4.0 HP, Portuguese Fundação para a Ciência e a Tecnologia—FCT.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Defect detection is a key element of quality control in today’s industries, and the process requires the incorporation of automated methods, including image sensors, to detect any potential defects that may occur during the manufacturing process. While there are various methods that can be used for inspecting surfaces, such as those of metal and building materials, there are only a limited number of techniques that are specifically designed to analyze specialized surfaces, such as ceramics, which can potentially reveal distinctive anomalies or characteristics that require a more precise and focused approach. This article describes a study and proposes an extended solution for defect detection on ceramic pieces within an industrial environment, utilizing a computer vision system with deep learning models. The solution includes an image acquisition process and a labeling platform to create training datasets, as well as an image preprocessing technique, to feed a machine learning algorithm based on convolutional neural networks (CNNs) capable of running in real time within a manufacturing environment. The developed solution was implemented and evaluated at a leading Portuguese company that specializes in the manufacturing of tableware and fine stoneware. The collaboration between the research team and the company resulted in the development of an automated and effective system for detecting defects in ceramic pieces, achieving an accuracy of 98.00% and an F1-Score of 97.29%.

Schlagwörter

Stichwörter der Autor:innen

CNNautomatic surface inspectiondeep learningdefect detectionindustrial surfacequality inspection

Autor:innen und Institutionen

  • Computer Science and Communications Research Centre, School of Technology and Management, Polytechnic of Leiria, 2411-901 Leiria, Portugal.
  • Instituto de Investigación en Informática de Albacete, 02071 Albacete, Spain.
  • Departamento de Sistemas Informáticos, Universidad de Castilla-La Mancha, 02071 Albacete, Spain.
  • Grestel-Produtos Cerâmicos S.A, Zona Industrial de Vagos-Lote 78, 3840-385 Vagos, Portugal.
  • INOV INESC Inovação, Institute of New Technologies, Leiria Office, 2411-901 Leiria, Portugal.

ORCID-Profile: Esteban Cumbajin, Nuno Rodrigues, Rolando Miragaia, Luís Frazão, Nuno Costa, Antonio Fernández-Caballero, António Pereira

Förderung

  • Fundação para a Ciência e Tecnologia
  • project STC 4.0 HP
  • Portuguese Fundação para a Ciência e a Tecnologia—FCT
  • Portuguese national funds
  • ECSEL Joint Undertaking (JU)
  • Horizon 2020 research programme and participating countries
  • MCIN/AEI/10.13039/501100011033

Zitieren

APA

Cumbajin, E., Rodrigues, N., Costa, P., Miragaia, R., Frazão, L., Costa, N., Fernández-Caballero, A., Carneiro, J., Buruberri, L. H., & Pereira, A. (2023). A Real-Time Automated Defect Detection System for Ceramic Pieces Manufacturing Process Based on Computer Vision with Deep Learning. Sensors, 24(1), 232. https://doi.org/10.3390/s24010232

Vancouver

Cumbajin E, Rodrigues N, Costa P, Miragaia R, Frazão L, Costa N, et al. A Real-Time Automated Defect Detection System for Ceramic Pieces Manufacturing Process Based on Computer Vision with Deep Learning. Sensors. 2023;24(1):232. doi:10.3390/s24010232

BibTeX
@article{Cumbajin2023,
  author = {Cumbajin, Esteban and Rodrigues, Nuno and Costa, Paulo and Miragaia, Rolando and Frazão, Luís and Costa, Nuno and Fernández-Caballero, Antonio and Carneiro, Jorge and Buruberri, Leire H and Pereira, António},
  title = {A Real-Time Automated Defect Detection System for Ceramic Pieces Manufacturing Process Based on Computer Vision with Deep Learning},
  journal = {Sensors},
  year = {2023},
  volume = {24},
  number = {1},
  pages = {232},
  doi = {10.3390/s24010232}
}
Kostenlos starten →